Rouque advertised a bender on Mud for awhile that could do 180* bends and uses a habor freight jack with air over hydraulic. See lots of people use 1.75" DOM.
Tech Questions Here
- Thread starter Volunteer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Got a problem with my 7.3, the CE light came on and it running like crap missing and idling rough. If im going down the road and the RPMs are holding steady around 1200 it shakes like crazy but if i speed up or give it some skinny pedal the shakes lessen alot. also it doesnt have much power at all.
I dont have a code scanner and i cant get access to one up here, anyone have an ideas?
I dont have a code scanner and i cant get access to one up here, anyone have an ideas?
need more info year mielage etc but with out a scan can be most anything.
99 f250 253000 anything else I really don't know. I'm gonna try doing tune up and oil change stuff cause I really don't know when any of that was last done.
tune up? like what ya gona tune ??
life blood on a power stroke is the oil! change fuel filter as well check coolant quality all can`t hurt.
but without a scan ya just pissin up a tree need to C what the ECM thinks is wrong & go from there
life blood on a power stroke is the oil! change fuel filter as well check coolant quality all can`t hurt.
but without a scan ya just pissin up a tree need to C what the ECM thinks is wrong & go from there
Last edited:
Tune up as in: change air filter, oil, and fuel filter. check coolant and other fluids. I'm gonna see what they have for sale around town for scanners.
HF`s top of the line unit is cheap & dose a pretty good job not sure about diesel parameters though
as for oil buy the best ya can afford Power stroke can & do exceed 3300 psi
as for oil buy the best ya can afford Power stroke can & do exceed 3300 psi
- Thread starter
- #2,048
I was gonna recommend that when I read the first post not a lot to tuneup on the diesels but that's a good start, I have a scanner if you wanna come borrow it
Good luck bud I hope its simple 
I bought motorcraft oil and oil filter.
diesel oil how many qt?
yes diesel oil and it takes 15 qts, im told
Need to replace the little plastic 90 degree clips that hold the linkage for the door handles on the 4Runner. The lock mechanization linkage . Other than the local dealership would anybody have a link that I could order from to get in before the SCC ? Thanks
Pep Boys?
Yea I guess I could check the help isle at the auto parts store .
Guys anybody have a battery cable crimping tool (hammer type or pliers type) I could borrow for a day ? I’m building new cables for the winch and the cables on it naturally are the wrong length for how I am running them. TIA.
- Thread starter
- #2,057
Wish I did Albert I could use one as well I guess I need to invest in a hydraulic with the dies to do the battery and winch leads.
I have one.....