Talk about wrong!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 16, 2007
Threads
12
Messages
164
Location
Kalifornia
As I dig deeper into the forum I started reading about the dreaded PHH just yesterday. I got some good chuckles out of much of the discussions--bad move.

You see, I pride myself on having a vehicle that doesn't deposit fluds on the driveway or asphalt. I am such a stickler that I take a look under the engine compartment every day. Guess what I found this morning? 2 or 3 drops of coolant on the ground!!! Popped the hood, didn't see anything alarming so drove the 2 miles to work. Leave work for lunch--2 or 3 more drops of coolant. Get it home for lunch, you guessed it. Popped the hood, crawled under in my cammies (Marine) and located the PHH--stinkin coolant around the lip of the connections. And I got my uniform dirty!!!!

It seems that just thinking/reading about this thing makes it go out. Note to self--don't laugh at the misfortune of others. What is interesting is I have all receipts going back from day 1 (3rd owner) and this part is not mentioned as being replaced. Could it be that this thing lasted 253k?

I will post pics of the hose so someone can tell me if it looks factory. Good news is I have a Jeep TJ sitting in the driveway that I will use as my DD until I decide what else I will delve into when doing the PHH. Good thing I didn't listen to my wife and sell the Jeep. :grinpimp:
 
What do you do in ventura County? I&I maybe?

Anyhow, the starter contacts and the fuel filter are common items to do along with the PHH.

I wouldn't plan on DDing the Heep for too long, the 80 might get jealous and throw a code 71 at you...
 
It seems that just thinking/reading about this thing makes it go out. Note to self--don't laugh at the misfortune of others.

Want to see some threads on head gaskets?:D
 
LOL. No, I work on Point Mugu--Program Manager for on of our EA6B systems. Starter replaced 14k ago by PO's mechanic (receipt) and fuel filter was done when starter was done--too bad they didn't have the foresight to do the PHH when it was easily gotten to with the starter out.

I think the heep has been jealous since I got the LC a few weeks ago. Put about 5 miles on her since--watch me get a CL from the heep now!!!
 
You'll know if it's been replaced- the factory clamps look like a metal band tightened with a cotter pin, and I've never heard of anyone using them again.

-Spike
 
You'll know if it's been replaced- the factory clamps look like a metal band tightened with a cotter pin, and I've never heard of anyone using them again.

-Spike

I've never heard of anyone getting them off without destroying them...:doh:
 
Couple of pics--new DD for a few days and the new driveway queen. Also a pic of the coolant seeping down at the bend in the pipe.

And the clamps are aftermarket--just no receipt that the work was done.
NewDDNLC.webp
PHHDrip.webp
 
I don't recognize that pic, kinda alooks like the floor pan, if so that would be the rear heat coolant pipes, not the PHH which is located on the driver's side of the engine block. Am I wrong?

-Spike
 
The way I see it is the leak from the PHH is slow enough that it is just traveling down and accumulating on that bend in the pipe--weird angle but the PHH is definitely leaking. Looks like that pipe travels to or near the phh upon initial inspection--didn't take a real hard look yet but did see fluid at the phh.
 
The way I see it is the leak from the PHH is slow enough that it is just traveling down and accumulating on that bend in the pipe--weird angle but the PHH is definitely leaking. Looks like that pipe travels to or near the phh upon initial inspection--didn't take a real hard look yet but did see fluid at the phh.

Looks like trans cooler lines running near/under the phh--not to the phh.
 
The PHH is a hose that connects a pipe on the side of the block to a pipe coming down from the top/rear of the engine. It doesn't connect to either of those pipes and doesn't go much lower than the head, so if you've found a leaky hose on one of those it's either a heater hose or something else. Whatever it is, it needs fixin', that's for sure. :D

-Spike
 
Pic is confusing all of you it seems--the drip from the PHH leak is hitting those lines that are pictured and dripping at the bend which is parallel to the ground.
 
OK, Im acronym dumb here...and cant find a definition to PHH other than Pesky Heater Hose. :confused:
 
By the way, found a receipt at 158,000 miles from the stealership saying they replaced the "Heater bypass hose".....same as phh?

Said heater bypass hose to block is leaking.
 
Pic is confusing all of you it seems--the drip from the PHH leak is hitting those lines that are pictured and dripping at the bend which is parallel to the ground.

I can understand that, I wasn't clear on where the drip was coming from and thought you posted the pic to show the actual part that was leaking. Sounds like you've got it figured.

TN_LandCruiser- yes, we're talking about the Pesky Heater Hose. There are other heater hoses as well, this one has a bad reputation. :D

-Spike
 
By the way, found a receipt at 158,000 miles from the stealership saying they replaced the "Heater bypass hose".....same as phh?

Said heater bypass hose to block is leaking.

Sounds good to me! :D

-Spike
 
Yeah I agree with Doug. If you want or need to think about something that will keep you up at night read about head gaskets. The crappy thing is that even if you have it done or do it yourself nothing changes you will still worry about it.

Karl
 
Back
Top Bottom