Suggestions for 2nd battery

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I do the "main" and "house" thing too, but winch stays on the main.
 
FWIW I was never going to install an electric winch. From day one I knew that if I was going that route that I would be going the MM Hydraulic. So I planned my wiring accordingly.
 
IMO, your primary battery is for starting and winching....isolators and solenoids are NOT rated for the draw of your winch under load...been there, tried that...

Why would winching from the secondary battery be any different than winching from the primary?

In either instance the winch is going to pull the voltage of the battery it's connected to down and the isolator/solenoid has to handle the current supplied via the other battery. The only possible argument is that the starting battery, if the truck is running, has some additional available current from the alternator which would cause current draw from the aux battery slightly less. However, if you're running a 500A isolator/solenoid, that's a drop in the bucket.

FWIW: I'm in the winch and parked accessories off AUX battery camp to avoid killing main.
 
Back
Top Bottom