Steering Wheel Replacement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 7, 2016
Threads
176
Messages
939
Location
Decatur GA
I am looking for a new steering wheel for my 1995 80. Or at least a decent used one. Is there anything I would need to know about taking mine off? I am a little scared of the air bag. Is there any special removal/installation technique I need to know about?

Would there be anything to worry about with a new or different steering wheel when it comes to the air bag? Is the canister/pressure made specifically for that air bag? I just wonder if I should stick to an FJZ80 steering wheel for safety reasons?


Also, anyone have a gray or black leather steering wheel? And, as long as it was safe, is there any reason why I could not mount a newer one with controls to a new radio? Would there be any wire routing issues?
 
Do a quick search on steering wheels, several threads relating to what your asking, they can be recovered, I think there is a camry? wheel that may fit with some controls but I'm not sure anyone has got tent hem to work. All our leather wheels are suffering!!
 
I looked at a bunch of past threads. I did see the Camry stuff, and some other options on re-covering and such. But I did not see one on proper removal techniques if there are any. And the possible problems that might come up due to different years.
 
I looked at a bunch of past threads. I did see the Camry stuff, and some other options on re-covering and such. But I did not see one on proper removal techniques if there are any. And the possible problems that might come up due to different years.
There shouldnt be any issue removing your old wheel if it dosnt have any controls on it, just undo the center nut and pull it off.
Mines an AU model and didnt get airbags on 94s so i didnt have that to deal with but i remove stearing wheels on airbag equipt cars every other day and its relitivly simple.
One thing to watch though, there is a "clock spring" witch is esentialy a coiled wiring harness foe the airbag and or stearing wheel controls and can be damaged easily if your not careful.
 
After looking at the replacement wheels on Ebay, it looks like the airbag just unbolts and is simply removed from the wheel?
 
Doing this tomorrow on a friends 80, thanks for taking the good photos of the removal. I'd like to add you want to store airbags face up not face down, if you put it face down and it goes off they will travel about 50 feet into the air if nothing is in their way. The chance of it going off on its own is super small though, they usually require a voltage signal to detonate.
 
Easiest thing to do is buy a used steering wheel from someone parting out and have it
redone, then replace the one you have and sell it....
 
More or less what I am doing. I have a pretty nice el cheapo on there now. Having the original redone. After putting it back together though, my air bag light is on. I am a little worried about messing with it. Any other part of the car and I would spray some di-electric oil on there and plug it back in. A little worried about doing it to the air bag.
 
Unplug the truck battery for a couple hours
 
Hm. OK. That sounds easy enough. I am going to give it a try right now.
 
Light still on?
 
Unplug the battery and touch the battery terminals together. As in disconnect the positive the and negative and then touch them together for 30 seconds. This accomplishes a full reset and should clear your airbag light.
 
Alas, I should have known I was not the first person with this problem. Thanks for the link. I have tried it several times and it has not worked yet. But I am using a very small wire clip for my ground. I am hoping that is the problem. I am going to try the speaker wire to the battery trick and see if that might work.
 
Back
Top Bottom