Steering Problem - Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 16, 2007
Threads
5
Messages
17
Location
Colorado Springs, CO
NEWBIE - Steering Problem

Hello everyone, newbie from Colorado with a '97 FZJ80. I am starting to notice a lot of play in my front wheels when driving. The steering itself seems mushy, and when I hit a rough patch in the road, the wheels seem to follow ruts or dance back and forth with no movement of the steering wheel.
I am not noticing any wear on my tires and the only thing that I can see as different is that I can grab my drag link (attached to the tie rod ends) and I can twist it (rotate it) pretty significantly in both directions. Also, I have the original steering damper. The Tie Rod is attached tightly and doesn't seem to have any play. Thanks for any help!
 
Last edited:
Could be wheel or trunnion bearings... Check the FAQ for test procedures, there are some really good writeups.
 
Check the bolts on the bottom of your knuckles, I think a few members have found theirs loose :eek:
 
If it is as bad as you describe, I would check it sooner than later, and try not to drive it. If the bearings, retaining nuts, or the arms come loose you will need a little more work...like a wrecker to pull it back on the wheels when you go wheels up at highway speed.
 
Update on steering problem

Many thanks to Landtank and others. Did the front axle check this morning and my bearings definitely have play, which explains the "hunting" problem when I hit rough spots or ruts on the road.
:confused: I was surprised that my drag link did not have any play, but I am a little confused on the drag link connection. While the 9/3 o'clock check showed no play, there seems to be some distance between my rubber bushings on the tie rod ends and the knuckle/pitman arms. This allows me to rotate or twist the drag link forward and back. Is this something I should be concerned about? I have new tie rod ends on my tie rod, but am wondering if I should replace the tie rod ends on my drag link.
Anyways, I will admit that I am amateur when it comes to working on vehicles. Is the bearing repack something I can really screw up, or should I get a shop to do it? Thanks for all of the help. :cheers:
 
The bearing repack is very messy & time consuming, but pretty straight forward if you do your research - reccomend the elmarriachi (sp?) DvD. I did mine for the first time this past fall, and fairly amature working on cars also.

Of course, there are any number of things that can go wrong which are hard to know until you get in there. I bodged a couple of axle seals until I got it right - so a few extra of those doesn't hurt.

What part of CO are you in?
 
We might be neighbors, I'm in C Springs too!!

Cool - I'd be willing to lend a hand if you decide to do it yourself. Though I'm in a sling for a few more weeks, so maybe more supervising/back-seat driving then actual help :flipoff2:

Theres a local Land Cruiser club that's pretty active: https://forum.ih8mud.com/forumdisplay.php?f=85
Next meeting is this Tuesday @ Liberty Toyota North, 7:00
next trip is next Saturday.
 
EricG, thanks for all of the great info and the offer (hope you heal soon!). I have to leave town on Monday for a week, so I might have to get a real professional to do this one for me. Speaking of which, any good shops in town? I have been here for 2.5 years and still looking for someone dependable. Thanks :cool:
 
Can't reccomend anybody myself - haven't needed anyone yet.
 
Back
Top Bottom