Steelies on GX460

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Do you think you have room in back for an extra 1/2 on either side? To run a 34x10.50?
I don't think the diameter will be the limiting factor, but the width for the fronts.
 
I don't think the diameter will be the limiting factor, but the width for the fronts.
BMC done, front fender not an issue, LCA pushed all the way forward. Prepared to deal with pinch weld.
 
BMC done, front fender not an issue, LCA pushed all the way forward. Prepared to deal with pinch weld.
I used a baby sledge hammer for mine.
 
Do you think you have room in back for an extra 1/2 on either side? To run a 34x10.50?
The BFG would probably fit as its a 33.5 so only about 1/4" bigger. A true 34" would require all the things to fit in the front. Like others have stated. Here is the back fairly well stuffed from a different perspective.

0616221726.jpg
 
The BFG would probably fit as its a 33.5 so only about 1/4" bigger. A true 34" would require all the things to fit in the front. Like others have stated. Here is the back fairly well stuffed from a different perspective.

View attachment 3116858
Thanks. Was thinking about the Toyo AT3
 
I got 5 brand new in Toyota boxes for $400

I just got the steel center caps (not pictured) from eBay but they were $160 for 4 smh
I love mine. They are only a few pounds heavier than the oem alloys.
 
I got 5 brand new in Toyota boxes for $400

I just got the steel center caps (not pictured) from eBay but they were $160 for 4 smh
Wow very nice price. I hope I get that lucky. LOL
 
Look'n good! But need more pictures of different angles before I can give it the full-on "heart" emoji! :p
I’m bad at taking pictures - heading to south padre island this weekend and I’ll get some better ones for ya lol
 
  • Like
Reactions: r2m
Wow very nice price. I hope I get that lucky. LOL

I did a 5hr road trip thru west Texas last month (super flat roads lol) and was getting 17.5 mpg, with the added weight of front bumper/winch, sliders, tire carrier and drawer setup. Daily driving to work and picking up kiddos I get 14 mpg
That's what I get with my 285/70s and 33x10.5R17s
 

Users who are viewing this thread

Back
Top Bottom