starter options

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 19, 2013
Threads
38
Messages
562
Location
Eastvale, CA 92880
I am trying to look for the best option for a starter. I thought that toyota/denso starters are all remanufactured for the price range of $160-200. I got a quote of around $700-800 for a new oem starter coming straight from japan. Couple of days ago i found this starter from cruiserparts.net. Their site says it is new with listed price of $179. I called them up to confirm and they said it is brand new and denso brand is from japan. Did not really confirm from the item if it says made in japan. Has anyone bought this particular starter from them? If so, can you confirm if it is really brand new or reman? Thanks.
 
i would assume the one cruiserparts is selling is the same denso that you can get on amazon. yes its brand new, but not oem. and yes when my starter goes, i will replace with a denso from amazon. no reason not to.
 
have a part number?
 
well now amazon doesnt seem to have a new denso. nor rock auto. but i do want the 2.2k for my cold climate up here. need that part number though....
 
If you have the time you can get it rebuilt.
 
Buy the parts store rebuild for cheap with a lifetime warranty. Or a Toyota rebuild kit.

Unless anyone will share 2.2kw part numbers. I haven't found any for sale, but haven't looked real hard either.
 
The new bosch one on amazon and rock auto is sr3240n. Boschs own website says this doesnt fit a 97. They do list a sr3240x for a land cruiser that is reman'd and says its 2.2k. I have to believe the new version is also 2.2k. But havent been able to find a cut sheet or website that will state that
 
If you are going to keep the vehicle for awhile, get a re-manufactured Denso ( I use the 2.2), then buy the components to rebuild the one you take out and keep it for a spare. The starter on an 80 series is not that difficult to reach and can be changed out on the side of the road if need be.

Rebuilding one normally does not require a lot of parts and is not expensive.
 
Why not just replace the contacts yourself, it worked for me.
 
The OEM starters are brilliant, if it is just the contacts that are playing up you can buy a new set C/W plunger assembly and fit them yourself in 90 mins which included pulling the unit. And as mentioned, buy a cheapo unit and fit it and keep your fixed one in the trail spares box.

regards

Dave
 
Pretty sure the consensus view is that the original starter is better than aftermarket in most cases.
 
Why not just replace the contacts yourself, it worked for me.


Yes, the vast majority will 'require' only contacts to be serviceable, but its better to tear the starter down (not hard) and inspect the bearings, brushes and gears. Clean the commutator of mica and carbon. Replace the plunger if necessary.

Put it all back together (properly lubed and sealed) and then bench test it. Then you KNOW you've got a reliable replacement/spare starter.

In a pinch, or if finances are tight....just replacing the contacts will get most starters going again. But a rebuild kit is not expensive.
 
Given that the contacts in the solenoid are the most common failure point I would replace them anyway, the plunger forms part of the contact set so it is a no brainer IMO.

regards

Dave
 
Back
Top Bottom