spring set Q

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 26, 2005
Threads
298
Messages
4,871
Location
in the garage
i have a set of 4" springs i got from projectdotnet.
same length side by side and eye to eye, but one pair has more arch to them.

my Q is: which are the fronts? the pair with more arch? cause of the weight of the front end compared to the back?

buildin up another set of hybred 60 spring paks for the front of the 40 :D

thanx
jim
 
When I put my BDS 4" spring lift on, I laid the springs out and I assumed the ones with more arch would go to the front due to the weight of the engine. When I looked at the part numbers though, the ones with more arch went to the rear. I have no idea if this helps you or not.
 
From the springs I've replaced, the rear ones have more arch for exactly the reason you stated in your 2nd post: The rear is higher than the front.
 
Back
Top Bottom