Speedo,phh,tranny,help question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 27, 2008
Threads
11
Messages
26
HELLO EVERYONE, I COULD PLEASE USE SOME ADVICE. THIS WEEKEND I HAD THE OPPORTUNITY TO START AND COMPLETE PHH, FUEL FILTER AND TRANNY FILTER CHANGE. ALL WENT OK, PHH WAS TRYING, BUT VICTORY. NOW FOR THE REST OF THE STORY, MONDAY MORNING DROVE AWAY TO SEE NO SPEEDOMETER.:o I HAVE CHECKED MANY OF THE POSTS REGARDING VSS AND WIRING BY STARTER AND BELL HOUSING, BUT I COULD SURE USE SOME ADVICE AND PICTURES, TO CLARIFY A SOLUTION. THANK YOU IN ADVANCE.
Picture 2687.webp
 
The speedometer gets its reading from a sensor in the transfer case. You may have bumped the sensor or wire and broken something while doing the transmission filter. Another possibility is that the speedometer ground point is on the intake manifold near the brake booster. You may have broken the ground wire or accidentally unbolted it during the fuel filter or PHH replacement. Start by inspecting both of these areas and making sure everything is connected properly. If it is, wiggling the wires might reveal a break or lack of connection in the harness.
 
checked both ends of curcuit

had opportunity today to inspect vss, looks ok . Unbolted ground on manifold.cleaned , inspected, retightened. Everything looks ok still no speedo or odometer. Checked fuses, but all other gauges work ok . I will post picks asap of pppphhhhhhhh
 
Back
Top Bottom