- Location
- United States
I built these nearly 15 years ago and ran them for the entire time. I recently removed them to do some some rocker panel rust repair and have decided to go another route so I'm letting these go.
They were based on George's bolt on slider plans but edited slightly with 3/16" steel 2"x4" main tube instead of 1/8" 2"x3" and have angled tips and tails and 1.25" round bar for a step up. I wheeled them all over the country and they held up very well. They are in decent shape as is for wheeling now or could be made to be perfect with a few hours of TLC and fresh paint (could re-weld a few spots etc). You will need to source your own u-bolts for mounting up. These were on my 1996 with dual inline cats on the U.S. passenger side and I believe they'll fit 1995-1997 as is.
Will let go for $300. Pickup only in Kennett Square, Pennsylvania.
They were based on George's bolt on slider plans but edited slightly with 3/16" steel 2"x4" main tube instead of 1/8" 2"x3" and have angled tips and tails and 1.25" round bar for a step up. I wheeled them all over the country and they held up very well. They are in decent shape as is for wheeling now or could be made to be perfect with a few hours of TLC and fresh paint (could re-weld a few spots etc). You will need to source your own u-bolts for mounting up. These were on my 1996 with dual inline cats on the U.S. passenger side and I believe they'll fit 1995-1997 as is.
Will let go for $300. Pickup only in Kennett Square, Pennsylvania.
