Slider build Take 1

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2007
Threads
16
Messages
189
Location
Murrieta, CA
So I had the day off today. So what better thing to do than to invade my buddys shop and use all of his stuff :D

Jason at DeMello Offroad is a good friend, and he wouldn't make me sliders for my LC, so I had to make them myself. He said that he would charge me too much to do it from scratch, and that I would be cheaper labor. So I started today. Here are the pics..........


Decided to beef the metal up a hair....

DSC01933.jpg


Got my rough cuts done
DSC01934.jpg


Spacers
DSC01935.jpg


Bends at the end done
DSC01936.jpg


Spacers notched and test fitted
DSC01937.jpg


I suck at welding, so Jason did it for me. He ain't to bad :)
DSC01938.jpg


Welded up mostly
DSC01940.jpg


Got the end caps welded on by Jeremy (another guy there)
DSC01942.jpg



Finally, a test fit without the legs on
DSC01943.jpg


From the side
DSC01944.jpg




I am getting the legs done tomorrow afternoon and into the evening, so I will be able to update this Saturday most likely.

I had too much fun today, and I am looking forward to finishing!
 
I am having DeMello Offroad powder coat them their wrinkle finish black. It should look pretty nice:)

Looks nice...I think maybe I'll go over there tomorrow and do the same thing. Thanks for starting all the measurements for me! :D
 
You have cooler friends than me! :D

Looks very nice. Will you weld them to the frame or bolt them?

Are you going to angle upwards for better 'deflectability'?

Show us the cat protection when you get 'em done.


Dan.
 
cool daR

Damn pretty nice. Cant tell you how many times I thought about asking Jason to make me some, I guess its the next best thing. I got some from Stubbs with a kickout and they are very beefy, not angled though. I was thinking after my last two Toyota were armored by Demello, having Jason design his own front and rear bumpers for my 80. I like Jasons stuff and I would have proabably been the first:bounce:to have a Demello edition 80. Not enough time and money so oh well.
 
Is that an 07 Sequoia in the background, maybe getting the donahoe treatment or something?
 
wow, looks good from the pics so far!
 
You have cooler friends than me! :D

Looks very nice. Will you weld them to the frame or bolt them?

Are you going to angle upwards for better 'deflectability'?

Show us the cat protection when you get 'em done.


Dan.

I am going to weld them to the frame. We are going to use a combo of "L" brackets, and flat plate for the ends of the legs. We will also angle them up on the sides. They are a little more wide than what he is used to, so the angle will bring them back in ever so slightly :D

As far as the cat protection, we haven't figured it out just yet, but we have a pretty good idea of what we are going to do..... I will get more pics today..
 
Damn pretty nice. Cant tell you how many times I thought about asking Jason to make me some, I guess its the next best thing. I got some from Stubbs with a kickout and they are very beefy, not angled though. I was thinking after my last two Toyota were armored by Demello, having Jason design his own front and rear bumpers for my 80. I like Jasons stuff and I would have proabably been the first:bounce:to have a Demello edition 80. Not enough time and money so oh well.
Yeah, Jason has done a BNCH of stuff for my last truck, and the wifes 05 Tacoma, and now her FJ. He was also looking at the front bumper area and doing his silent stare. The one where he is seeing the bumper finished stare :)

Is that an 07 Sequoia in the background, maybe getting the donahoe treatment or something?
Yeah, the Sequoia was getting the Icon (Former Donahoe) front end, and they opted for a poly spacer in the back with 5100's. It looked pretty good when it was done.
 
Well, since Darrin has not updated the board, I will. We were able to complete the outer portion of the sliders for his and mine without any issues other than my measurements were off so my sliders are 2-3 inches longer. (That will make it easier to identify when they come back from powder.)

Now for the fun part...we spent most of the time trying to figure out the best way to bend tubing around the cats and after several attempts finally got the right bend at the correct angle to attach to the frame. At that point it was pretty much quitting time since it was 10 on a Fri night and we were all tired (Darrin more so) and met our daily quota of metal burns (again, Darrin more so).

We will finish them up sometime this week and post up more pics.

Bottom line: Building sliders for an 80 with the cat placement and angled frame rails is a pain in the ass! :mad::bang::censor:
 
He was also looking at the front bumper area and doing his silent stare. The one where he is seeing the bumper finished stare :)Yeah, the Sequoia was getting the Icon (Former Donahoe) front end, and they opted for a poly spacer in the back with 5100's. It looked pretty good when it was done.


ooooh man, wonder what he saw in his minds eye...I bet it was nice, lol.

Just a rant...why get an 07 Sequoia $$$$, go donahoe in the front $$$$$, and the get a poly spacer:confused:....

If you bought that thing why would you start skimping on suspension, eh maybe theres nothing else available yet...Is it leaf sprung or coils?
 
ooooh man, wonder what he saw in his minds eye...I bet it was nice, lol.

Just a rant...why get an 07 Sequoia $$$$, go donahoe in the front $$$$$, and the get a poly spacer:confused:....

If you bought that thing why would you start skimping on suspension, eh maybe theres nothing else available yet...Is it leaf sprung or coils?

Coil sprung IRS.

ICON (formerly DR) offers replacement coils for the FJ/4Runner so the Sequoia may be next.

And what Jason saw in his mind: "These guys won't stop bugging me about this 80 crap...I have FJ stuff to build!"
 
IRS, huh thats a suprise.

I think the FJC changed Jasons life..:D
 
Prob went with IRS to compete with the Expedition and Armada. Suprised that Chevy has not done the same with the Tahoe yet.

You are correct...because the FJC, he never leaves the shop. Good for business though.
 
Sick, how much do you have in material cost for those?

I think material will only be around $150+powder but I really didn't ask the exact amount. We knew we wanted Jason to help on the build since we have had several other products from him on other vehicles. We will obviously give him something for his time as well. :D
I don't want to give anybody the impression that he is going to pump these things out for less than everybody else, if at all. He said that based on how much labor goes into 80 sliders, it's no wonder why all the other guys charge 700-1000.
 
Back
Top Bottom