Shifted into Reverse at 40 mph.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 23, 2004
Threads
145
Messages
2,071
Location
Beaverton, Oregon
Let me start by admitting that I am a moron. No further flaming necessary. :doh:

A few weeks back, sitting in a long line of cars at a stop sign, I shifted into L (standard high range) for no understandable reason. I was bored and going .5 mph. As I left the stop sign, the truck accelerated normally until it started surging and bucking and blowing a small amount of dark "smoke" out the tailpipe. WTF? Oops, I forgot to shift into D.

As I realized what I had done, I quickly made the move to shift into D, only I blew right past it into R. No idea how the lockout didn't keep that from happening, but I shifted straight into R at probably about 35-40 mph. Not sure exactly, it happened kinda fast. I must have been holding the button down on the shifter. Oops, again.

I was surprised that the wheels didn't lock up or really even slow me down that much. I was only in R for a second or two, and all I heard was a winding up sorta noise. It did slow down a bit, but not to a screeching halt by any means. I shifted right into D and kept traveling right on down the road.

Tech Questions:
1) What in the system would soak up that kind of energy?

2) What should I be keeping an eye on?

I'm planning a tranny fluid swap in the immediate future, as well as new oil in the TC. Still runs/drives fine. I do have a couple little noises I'm trying to figure out, but not sure if that is related at all ~ a bit more clunk shifting D-R-D than usual on nearly new u-joints and a very light screeching metal-on-metal noise somewhere in the rear. I'm hoping brakes.
 
I did that once in a Ford Taurus. At first no signs of anything wrong. Came to a screeching halt. Everything was fine, but after about a month, tranny started to slip. Eventually only could drive backwards. I'd keep an eye on the tranny and just see how it goes over the next month. This is just from my experience. But of course it isn't a Ford either.
 
I did the same thing in my dads F-250. Scared the S#$T out off me. I came bouncing to a hault. That was 3 years ago. Fortunately nothing is wrong with the tranney. But I would still keep an ear out for any unusual noises.
 
C6H12O6;2363991 1) What in the system would soak up that kind of energy? 2) What should I be keeping an eye on? [/QUOTE said:
1. Torque converter. It's an automatic. No gears, just clutches.

2. Change the fluid and drive. I doubt anything really bad happened here. Try to let the shifter do its thing next time.
 
I'm more amazed that you were doing 40mph in 1st gear! :lol: What are the rpm's at that speed??

If it were me, I think I'd drop the tranny pan and check/clean the filter/screen.

Curtis

I imagine he was bouncing off the rev limiter when this happend. He is also running 33's with stock gears...

BTW- Don't worry about it, Steve... We all do funny things when we are being chased by wild animals! :flipoff2:
 
Did that in my 2000 Tundra on the highway in traffic, similar situation.
Basically it was going to shut off until I put it back down to N and D.
Never had any adverse reactions and it always worked the same from that point on.
 
Thanks for posting this.

I've been always tempted to shift into R while driving, mainly because this is my first auto tranny vehicle and I am a curious kind of person. You know, there were such moments when my hand was on the shifter and I was about to make the move but never have the balls.

Now my curiosity is satisfied so I no longer have this stupid temptation while driving.

What a relief :)
 
Thanks for posting this.

I've been always tempted to shift into R while driving, mainly because this is my first auto tranny vehicle and I am a curious kind of person. You know, there were such moments when my hand was on the shifter and I was about to make the move but never have the balls.

Now my curiosity is satisfied so I no longer have this stupid temptation while driving.

What a relief :)

Believe it or not, there is a test/possible remedy for certain symptoms in the A440F tranny (88-92 Cruisers) that involves throwing the shift lever in park at hiway speeds. I kid you not.

Curtis
 
Believe it or not, there is a test/possible remedy for certain symptoms in the A440F tranny (88-92 Cruisers) that involves throwing the shift lever in park at hiway speeds. I kid you not.

Curtis

That would be the test that conclusively proves you need a new transmission. :cheers:
 
Believe it or not, there is a test/possible remedy for certain symptoms in the A440F tranny (88-92 Cruisers) that involves throwing the shift lever in park at hiway speeds. I kid you not.

Curtis

Seriously? :eek: Details, please!!
 
Test Details

This is the test where you sheer the end off the Park Brake Pawl or smash the Park Brake parts to pieces if it will engage. You might get luck and not have the pin engage at speed of course.
By all means try it but there will be tears. Of course you may not smash the Park Brake bits but with a vehicle as heavy (2950 Kgs) as an 80 series something will break if you do it.

Have fun
 
While I have not done this "test", it is real and was recommended by Rodney at Wholesale Automatics in OZ. The park pawl will not engage at higher speeds and apparently this method causes a rapid fluid pressure increase in certain passages and can free sticky valves in the valve body. At least that's what my failing memory leads me to believe. I do know that several on the 3FE Yahoo list have done this with success and no damage.

Personally I have no reason to do this and it does contradict some basic stuff.
 
While I have not done this "test", it is real and was recommended by Rodney at Wholesale Automatics in OZ. The park pawl will not engage at higher speeds and apparently this method causes a rapid fluid pressure increase in certain passages and can free sticky valves in the valve body. At least that's what my failing memory leads me to believe. I do know that several on the 3FE Yahoo list have done this with success and no damage.

Personally I have no reason to do this and it does contradict some basic stuff.

I did this on accident doing about 45mph and the truck shut off and the tranny acted like it was in N. Pulled over started it up and drove away. That was about 120k miles ago. 185k now and never a problem.
 
well, if the P pawl was designed in a clever way so as not to engage under high speed motion, I am even more impressed with the Toy engineers than I already am...
 
FWIW, my dad did this in a '92 Ford Aerostar AWD and you could hear the pawl engage against a rotating gear. Came to a stop like that, did not sht off. No problems since then.
 
Back
Top Bottom