SEMA 2017

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Nice. I passed recently on a SC because I still think I want V8 Power. I go to the mountains of CO and the 1fz strains.


Eaton supercharged and intercooled. XEDE piggyback ECU. Pacemaker headers, 3" exhaust headers back. 425hp. Marks4WD reduction gears in transfer, 5.29 Nitro gears in differentials. By the way, all Toyota based parts. No funky exotic stuff. All maintainance parts & consumables can be found at the local auto parts for a stock 80 series.
 
This forum in general tends to be more conservative......Don't take it personal. Build it how you like. You'll never please every one.

@SoCal FZJ80 - this would be my take-away.

Heck, even if it isn't practical but makes you smile walking to the parking lot full of Civics & Priusii (plural of Prius?) - then good on you.

I'm hellbent on putting a winch in the bow of my river sled, I'm used to people giving me poo-face when I say it. We all got our own way.
 
@SoCal FZJ80 - Thanks for taking the time to explain the brake line routing.

My apologies for my comment as I obviously didn't have the full picture. Another version of the lesson for me that two eyes/ears and one mouth mean I should look/listen twice as much as I speak.

As has been pointed out, the rig works for you and your needs and you have a lot of time into your build. As long as it satisfies you, that's all that matters.
 
i like the bumpers and the wrap. Keep thinking about wrapping mine in a digital camo pattern.
Actually I regret not going with digital camo, it was the original direction but the graphic guy I was working with insisted regular camo looks better. Always go with your original idea. Digital camo looks pretty good when done right.
 
Here is another nice build from SEMA, a GX470... or Prado in the rest of the world.

IMG_8349.webp


IMG_8350.webp


IMG_8352.webp


IMG_8353.webp
 
Nice. I passed recently on a SC because I still think I want V8 Power. I go to the mountains of CO and the 1fz strains.
No issues with the 1Fz when running forced induction, surely saves energy on installing bolt on parts over a full swap. Fuel economy is decent unless you get heavy on the right foot pedal. Of course with fuel economy generally the turbo diesel wins in the mpg category.
 
I've seen your rig in person before at KOH. It's impressive and it's obvious a lot of work went into it. But you gotta realize it's the Land Cruiser equivalent of a Chevy/Ford/Dodge brotruck. Rigs like that tend to get clowned on because they are usually all show and no go, especially when they're jacked up 3ft in the air. This forum in general tends to be more conservative with lots of guys thinking that anything bigger than a 35" tire is only for showing off. Hell it's not even just the Land Cruiser guys. I saw the Jeep forums hating on your rig too a few years back. Don't take it personal. Build it how you like. You'll never please every one.
I already have a HJ61VX which is turbo diesel 4" of lift on 35" BFG mud terrains, factory cable lockers which is pretty nice. My wife drives it. I've driven both to KOH, and the big one is much more fun. And my kids prefer the "monster truck" any day of the week. It's their street legal version of monster jam. I"m guessing next year I should just take Diesel HJ61VX to SEMA so I don't catch so much flack. Just something about being in a cruiser that lets you look straight on at someone driving a big rig. Anyone can do it with a jacked up domestic, but a cruiser? Not so much.
Check out the pictures of the 4Runner I will put in my next post. It dwarves my cruiser and is on 54" .... holy cannoli
 
Last edited:
Still better than a JK with LED bars and 'meanie' eyebrow ridges over the halo headlights. I think they all order from the same catalog. :D
Yes, it surely is a lot easier to just order parts and bolt them on then making them yourself that's for sure.
 
Lexus SEMA Shuttle vehicles were A fleet of GX460 and a LX570

IMG_8428.webp


IMG_8429.webp
 
Yeah everybody was talking crap about that POS 4runner all over Instagram. The front driveshaft was a thing of sheer stupidity.

that was for a kicker booth .?

if so .. that will explain it all ..
 
Eaton supercharged and intercooled. XEDE piggyback ECU. Pacemaker headers, 3" exhaust headers back. 425hp. Marks4WD reduction gears in transfer, 5.29 Nitro gears in differentials. By the way, all Toyota based parts. No funky exotic stuff. All maintainance parts & consumables can be found at the local auto parts for a stock 80 series.
How are you getting 425hp out of a Eaton supercharger? Do you have a pic of your setup and any pics of the power curve from the dyno? The Eaton compressor is not a very efficient design and difficult to get much power out of unless you are using something other than the m90.
 
Back
Top Bottom