Seat Heater Install

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 11, 2012
Threads
31
Messages
388
Location
Denver, CO
Website
www.southwestoverland.com
I'm pretty stoked about the seat heaters I installed. There's not much to them so this is mostly about the pictures and the feedback for other forum members who might be on the fence about them.

These are the ones I bought: Amazon.com: Sports Imports LLC 2 Seats Universal Carbon Fiber Dual Temp Seat Heater Installation Kits - Free 3' Switch Extension: Automotive

I also bought hog ring pliers and hog rings to make the upholstery part of the job go smoother. Money well spent IMO.

For the wiring, I brought them to the center of the vehicle, ran them under the console and shifter housing then over to the fuse box where I plugged it into the space for the rear seat heater, which is 30 amps as I recall and each seat heater is 10amps so this circuit has plenty of capacity for these heaters, which also have their own 10amp inline fuses.

Anyway, on to the pictures...

IMG_5528.webp IMG_5529.webp IMG_5530.webp IMG_5531.webp IMG_5532.webp
 
Last edited:
I used the for the first time the other day and they heat up as quickly and to what feels like just as high of a temperature as the heated seats in my 2013 Subaru Legacy. I have to say, for around $80 + a few tools I had to buy, this is an excellent update if you're a warm blooded SOB like me. I friggin' hate the cold!

Cheers :beer:
 
I used the for the first time the other day and they heat up as quickly and to what feels like just as high of a temperature as the heated seats in my 2013 Subaru Legacy. I have to say, for around $80 + a few tools I had to buy, this is an excellent update if you're a warm blooded SOB like me. I friggin' hate the cold!

Cheers :beer:

I have the same set and they don't get hot, just kinda warm. Hmm
 
I would like to see if their is a way to convert seats to have cooling in them. I am always sweating out on the trail. The seat heaters are really nice when its cold and the motor isn't warm yet.

I've been down this lonely road for a long time. It was the ONLY reason I didn't install my leathers for over three years.
 
The pics will be very useful, thanks for posting!
 
I have some of these switches that I am not using. Free as long as you cover shipping. PM me if you want them
 
I have the same set and they don't get hot, just kinda warm. Hmm

Interesting. Mine definitely get hot. Do you have leather? How much of the heating element did you use? I took mine all the way out to the seat base edge and way up the back. In other words, I didn't remove any length so maybe that's why?
 
Definitely agree, this is one of my favorite mods and it's alot simpler than you'd think.
 
My seat warmers get hot quickly, no messing around. Picked mine up from AATLAS1X along w the leather for my 80...all still going strong 3 years later.

I'm interested in putting the same seat warmers in my 62, but w Toyota switches
 
Back
Top Bottom