ScanGuage bracket

[sdouglassjr]

Is anyone printing a bracket/mount for the scanguage? I don’t want to have to Velcro it do the dash or steering column and I’m not handy enough to fabricate one out of thin metal

 

[jjdeneen918]

Mine sits on top of the steering wheel assembly. No Velcro, it just sits there.

been there for years with no issue.

 

[rolliges]

Flattened beer can covered in gaffer's tape in wedged in the sunroof control thing. Scanguage velcro-ed to that. Works well.

If you can drink beer, you are handy enough.

 

[JLH911]

(deleted)

 

[greentruck]

It's homely, but it works. There's a small piece of aluminum bent to an angle, some 3M trim tape. possibly a small bit of Velcro that's hidden when viewed from the driving position.

It's where you can key it without taking your eyes off the road, a little flexible, but has stayed put for about a decade. Cable is squeezed into the panel gaps to help keep it in order as it goes under the dash.

 

[retlaw]

Scan Gauge II Mount for OBD2 the Landcruiser FZJ80 - Etsy

This Car Accessories item by SolveFunction has 78 favorites from Etsy shoppers. Ships from San Mateo, CA. Listed on Mar 19, 2024

www.etsy.com

 

[abuck99]

Is anyone printing a bracket/mount for the scanguage? I don’t want to have to Velcro it do the dash or steering column and I’m not handy enough to fabricate one out of thin metal

@BenCC has a thriving 3d part design & print business over on the 100series forum-

Heres the list of SG items- maybe something there will work or maybe he can create 80series specific prints

Build - Ben3DBuild

Greetings. This is a half build and half promoting thread. I want to document my 3d printed parts/accessories and share the design/fabrication process. List that shows what is currently available to purchase: Make 1: Scangauge II Mount for Toyota Land Cruiser 100 Series Make 2: M2 V1: Rocker...

forum.ih8mud.com

 

[flintknapper]

Put mine in the pocket below my radio.

 

[FirstToy]

I have the solvefunction.com 3d printed one that goes on the steering column
It's a decent compromise

 

[FZJ80 named Sue]

I have the solvefunction.com 3d printed one that goes on the steering column
It's a decent compromise

I have the Solve Function one too, works great

Scangauge II mount for FJ80 FZJ80 Landcruiser

Mount a Scangauge II to the steering column. Placement is tucked back far enough to allow visuals of all warning lights. Tilt function of the steering while is not disturbed. Mount with 3M VHB tape.

solvefunction.com

 

[NLXTACY]

I have one coming up that’ll mount to my mirror arm.

 

[sdouglassjr]

I have one coming up that’ll mount to my mirror arm.

Will it be available to the public soon? Fingers crossed

 

[NLXTACY]

Will it be available to the public soon? Fingers crossed

definitely not soon. I have other more pressing priorities.