SAS SAS #9 Official Page 08/04/25- 08/08/25 (39 Viewers)

[cstav86]

All... I am local and extending to all participants this offer. If you are broke, need parts, need help RustyNailRacing HQs doors are open to you. Screenshot this post and get in touch, we are in Ridgway. I am a full time firefighter but run the shop with 1 full time employee plus me and we are in the San Juan every single day, so we get it. We have or have access to pretty much anything Toyota within 24 hours and a full fab shop right here in Ridgway. Even if you just need to change your oil, we have your factory Toyota filter and AMS oil in stock.
Justin
970-261-9757

View attachment 3816602

This is fantastic. What this community is all about.

 

[Mike Shull]

And they have some pretty cool merch…

 

[John McVicker]

All... I am local and extending to all participants this offer. If you are broke, need parts, need help RustyNailRacing HQs doors are open to you. Screenshot this post and get in touch, we are in Ridgway. I am a full time firefighter but run the shop with 1 full time employee plus me and we are in the San Juan every single day, so we get it. We have or have access to pretty much anything Toyota within 24 hours and a full fab shop right here in Ridgway. Even if you just need to change your oil, we have your factory Toyota filter and AMS oil in stock.
Justin
970-261-9757

View attachment 3816602

Don’t get me wrong, I absolutely do believe this…but it almost too much to believe. Thank you so much!

 

[sogncab]

Some short videos from last year.







January 15, 2025 - https://youtube.com/shorts/uujyecpN60I?si=sfv9vaqD6Uyb1tHV

 

[TheBlackSheep]

Some short videos from last year.







January 15, 2025 - https://youtube.com/shorts/uujyecpN60I?si=sfv9vaqD6Uyb1tHV

Not going to lie, my soul might’ve left my body when you lifted that rear tire.

 

[sogncab]

Not going to lie, my soul might’ve left my body when you lifted that rear tire.

That wasn't even that hairy.


40's are tiny. They work best on 3 tires.

 

[Mike Shull]

That wasn't even that hairy.


40's are tiny. They work best on 3 tires.

What headlights are you running?

 

[Flatlanderfj40]

Some short videos from last year.







January 15, 2025 - https://youtube.com/shorts/uujyecpN60I?si=sfv9vaqD6Uyb1tHV

Angle iron…did you install that?

Proffitt’s Resurrection Land Cruisers on Instagram: "Why is angle iron hokey? At Proffitt’s Resurrection Land Cruisers, some pre-fabricated structural steel, like angle iron and channel are especially forbidden. Here’s why. #angleironishokey #fabrica

364 likes, 20 comments - procruiser on January 14, 2025: "Why is angle iron hokey? At Proffitt’s Resurrection Land Cruisers, some pre-fabricated structural steel, like angle iron and channel are especially forbidden. Here’s why. #angleironishokey #fabrication #angleiron".

www.instagram.com

 

[sogncab]

Angle iron…did you install that?

Proffitt’s Resurrection Land Cruisers on Instagram: "Why is angle iron hokey? At Proffitt’s Resurrection Land Cruisers, some pre-fabricated structural steel, like angle iron and channel are especially forbidden. Here’s why. #angleironishokey #fabrica

364 likes, 20 comments - procruiser on January 14, 2025: "Why is angle iron hokey? At Proffitt’s Resurrection Land Cruisers, some pre-fabricated structural steel, like angle iron and channel are especially forbidden. Here’s why. #angleironishokey #fabrication #angleiron".

www.instagram.com

Yeah. That's my handiwork.

I own a cabinet shop! The amount of metal working tools I have could fit in a grocery bag

 

[DangerNoodle]

I got to unangleiron it lol

 

[sogncab]

What headlights are you running?

I've got the ones from city racer in there. They are alright, but I put a set of the Rigid replacement lights in my 80. They are intense.

I've got 6" Rigid 360's and a Pair of the Rigid SR-Q lights flush mounted in the front bumper. They make most of the light.

It's F-ing intense. Dude cut me off last summer, I kicked all the lights on. He cast a shadow on his own windshield....

 

[sogncab]

I got to unangleiron it lol

Glad I can be thrown under the bus in the name of content. HAHA

 

[Kleatus]

Glad I can be thrown under the bus in the name of content. HAHA

Surely they don't think they're done with those? They need some little dimple die punch outs to add rigidity, and another cut swept up between the bolts to make it look even more betterer. Countersink the holes for some flat head cap screws. Knurling on the edges to aid in grip when handling the part? Maybe some polishing then a nice scroll work engraving of a volcano prior to color case hardening the new bracket?

Pardon me for a minute, I need to run to the shop and gather up all my angle iron and make sure I get it in the scrap bin before I too am shamed!

 

[Mike Shull]

I've got the ones from city racer in there. They are alright, but I put a set of the Rigid replacement lights in my 80. They are intense.

I've got 6" Rigid 360's and a Pair of the Rigid SR-Q lights flush mounted in the front bumper. They make most of the light.

It's F-ing intense. Dude cut me off last summer, I kicked all the lights on. He cast a shadow on his own windshield....



View attachment 3816892

It must be the beams from the Rigid lights that I am seeing in the video. They do look intense!

I still have the second set of headlights ever purchased for my Land Cruiser and I don’t quite understand how they were ever DOT approved because I can’t see a thing when they’re turned on. I have been driving with my fog lights for the past six months. I am looking at picking up a set of Vintage Car 5000 LED headlights and we’ll see how those work.

 

[Ditcherman]

Glad I can be thrown under the bus in the name of content. HAHA

Don’t worry too much about it, I have A LOT of metalworking tools, but as a farmer it’s very hard to kick the angle iron habit.
You people are my inspiration.

“Because it has geometry” is my favorite.

 

[sogncab]

Surely they don't think they're done with those? They need some little dimple die punch outs to add rigidity, and another cut swept up between the bolts to make it look even more betterer. Countersink the holes for some flat head cap screws. Knurling on the edges to aid in grip when handling the part? Maybe some polishing then a nice scroll work engraving of a volcano prior to color case hardening the new bracket?

Pardon me for a minute, I need to run to the shop and gather up all my angle iron and make sure I get it in the scrap bin before I too am shamed!

Dude. Stop spending my money.

 

[Ditcherman]

Surely they don't think they're done with those? They need some little dimple die punch outs to add rigidity, and another cut swept up between the bolts to make it look even more betterer. Countersink the holes for some flat head cap screws. Knurling on the edges to aid in grip when handling the part? Maybe some polishing then a nice scroll work engraving of a volcano prior to color case hardening the new bracket?

Pardon me for a minute, I need to run to the shop and gather up all my angle iron and make sure I get it in the scrap bin before I too am shamed!

I think I detected some mill scale left on that not-angle in the video.
Disgusting.

 

[DangerNoodle]

Dude. Stop spending my money.

So many Karl monies to spend on mud flap holders

 

[sogncab]

It must be the beams from the Rigid lights that I am seeing in the video. They do look intense!

I still have the second set of headlights ever purchased for my Land Cruiser and I don’t quite understand how they were ever DOT approved because I can’t see a thing when they’re turned on. I have been driving with my fog lights for the past six months. I am looking at picking up a set of Vintage Car 5000 LED headlights and we’ll see how those work.

The Rigid replacement headlights are cheap, but the performance is really good.
The quantity of light, and it being lensed into a proper beam

 

[Kleatus]

I think I detected some mill scale left on that not-angle in the video.
Disgusting.

Mill scale?!? How did I miss that? You mean to tell me that's made of peasant grade hot-rolled steel? Not billet? Shame...