Saginaw steering issue?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2006
Threads
100
Messages
501
Location
Chadds ford, pa
:crybaby: :crybaby: Hello,

I put in a saginaw conversion but have a strange issue. It is much easier to turn the wheel to the right than it is to the left???? This in it self is not my main concern.

The problem is when traveling at speed my FJ darts to the right. It does not just wonder right it almost turns right? I can't let go of the wheel.

Can anyone help. Do I have a bad box? Do I have air in the system? :crybaby:
 
Welcome to Mud!

We need more information to help you. Model of Cruiser, SOA or not, what else did you change at the same time? Did you do the work yourself, did you use a "kit", did the truck steer fine before the powersteering? And in this case pictures can be worth a million words.
 
Have you done an alignment?
Do you have the same steering wheel turns turning left as you do right?
If you have both front wheels off the ground do you have the same issue?
What size tires?
Are the knuckes in good shape?
Are you SOA?
Do you have the PS lines connected correctly?
Is the steering box new?

Saginaw conversion can bring out all kinds of flaws in steering that stock steering wouldn't have.
 
calsum2 said:
Hello,
I put in a saginaw conversion but have a strange issue. It is much easier to turn the wheel to the right than it is to the left???? This in it self is not my main concern. The problem is when traveling at speed my FJ darts to the right. It does not just wonder right it almost turns right? I can't let go of the wheel.

Can anyone help. Do I have a bad box? Do I have air in the system?




Welcome.


Did you install a used steering gear?

Where did you get your steering gear from?

How long have you been running this system?

How long has your steering been acting this way?

Has the steering ever been correct?
 
Steering issues

I have a shakle reversal which was done several years ago. Thier were no steering issues after reversal. At that time I had manual steering.

I rebuilt knucles last year no issues

Late last summer I installed saginaw steering. It is a three bolt box. The kit was purchased from btb products. The steering box is new or rebuilt.

This steering issue started as soon as it was installed tires are 33'sx12.5
 
calsum2 said:
Late last summer I installed saginaw steering. It is a three bolt box. The kit was purchased from btb products. The steering box is new or rebuilt. This steering issue started as soon as it was installed tires are 33'sx12.5


So for clarity:


You installed Saginaw power steering late last summer and have been experiencing these issues that you describe since then? Do I have this correct?
 
Ok,

I have attached pictures of the install. By the way thanks for the help!!
 
Last edited:
Does that steering gear say " AGR " on the piston end cap?

Look through the fairlead hole, or from underneath...
 
Last edited:
Another picture
IMG_0348.webp
 
thank you for that pic.


Ok,

So you do not have an AGR steering gear.....I had an AGR steering gear that was not 2 years old that would not steer to the right as easy as it would to the left....purchased a new gear from PSC, and no more issues.


It sounds to me like your steering gear is jacked....any chance you know someone with one that you can try out?


-Steve
 
Unfortunatly I don't, but I agree that the gears must be F'ed up. especially since is steers to the right easier than the left. It's been a year since I bought the set up from BTB so I'm sure they wouldn't replace the box.

I may try to find a used one at the junkyard.
 
Back
Top Bottom