RTH Stuck in Ely NV need starter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 2, 2015
Threads
30
Messages
637
Location
Valley Springs, CA
Well I got a nice loud click at the starter plenty of power fuses are perfect fusible link is brand-new just now put it in looks like I need a starter. the next one that can get here won't be until next Thursday is there anybody nearby with one. I hope so

Feeling a little desperate.
707.758 3818
 
Tap on the starter while giving it a jump from another vehicle would be the only option to get it going without changing it. Of course if you had a manual transmission, just get it rolling and pop the clutch.
 
Marc Van Tassel (Ely Family Dental) is a HUGE cruiser head and lives in Ely.

@cruiseroutfit Kurt-- Maybe you can get @dcguillory in touch with Marc?

I have a starter rebuild kit I could overnight for you tomorrow if you want to go in that direction.

Ely Family Dental
@beno - you are the man. Always lurking around when people have questions or need RTH. Bravo senor.
 
Just beat on the starter and cycle the key on and off really fast until it fires up. It’ll start 9 Times out of 10. This was almost a routine or ritual for me until I finally got fed up and replaced the starter.
 
Marc Van Tassel (Ely Family Dental) is a HUGE cruiser head and lives in Ely.

@cruiseroutfit Kurt-- Maybe you can get @dcguillory in touch with Marc?

I have a starter rebuild kit I could overnight for you tomorrow if you want to go in that direction.

Ely Family Dental

Surely. Marc may let you still his 80 starter too... he may carry a contact/plunge kit too. @dcguillory, pm me your phone number if your still awake. I'm a night owl as is Marc!
 
Just beat on the starter and cycle the key on and off really fast until it fires up. It’ll start 9 Times out of 10. This was almost a routine or ritual for me until I finally got fed up and replaced the starter.

Exactly.

Smack it with a hammer and drive off to where you can buy a new starter.
 
Thanks for the responses. Lots of banging on the starter while attempting to start. No love. Normally I am not in a big rush but I have clients at my house this weekend. Been beering up the locals and will harass beno and his contact in the morning
 
Give Oreilly autozone and napa in Elko a call and see how far out they are on one. I can see when my buddy is headed down to the copper queen next.
 
So I got marks number here in Ely but it goes straight to voicemail I'm going to wait a while longer and then we'll have to go with the overnighting a rebuild kit route. Also I don't have a smart phone and my tablet is not liking the internet that I'm able to walk and get so I don't have very good access to the Forum
 
I had to hit mine harder than I thought, it wasn't just a love tap. Took a few whacks but it finally fired up so I could drive home. Good luck.
 
You do have to smack it. Tippytapping won't do.

If smacking it doesn't work, the other thing you can try is to jump across the two large lugs. Not as easy on a 1FZFE than some others because the lugs are on opposite sides of the solenoid. If you don't have jumper cables, get creative and cut the rubber coating off of the tips of the handles on a pair of needle nose pliers and try those to jump. Be prepared to see sparks and fire works as you are holding on to welding current.
 
Back
Top Bottom