Replacing Brakes on a 69 /71

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 26, 2005
Threads
474
Messages
4,670
Location
Oregon
OK, Here’s my dilemma...

I have a 69 and just got a body off a 71. I'm going to go with the new 71 style master brake cyl. But I want to keep the rest of my 69 in tact. I know about the front / rear issues, but I need to know what needs to be changed.

Are the old hard lines going to work? (i don’t think there the same inner / outer diameter?)

Can I run new hard lines that fit the new master, and run them to the drums? Any connectivity issues etc?

I'm trying to do this on the cheap, I just need to know what is a must change, and what’s good to leave as is.

Your answers are much appreciated.
 
I would definitely run all new lines. If you can get the brake line ends out of the 69 wheel cylinders then just cut out the old lines, run new ones, then use your old ends on the new lines. You will need to get a tubing bender and a GOOD line flare kit capable of doing double flares. I got one from AutoZone that works but just barely. It doesn't clamp the line securely enough sometimes and it slips.

For some reference pics of the 1971 brake system go here http://tinyurl.com/bs8f5 Look at all the brake sections and the knuckle rebuild section. I know there are a lot of differences in the 69 and 71 brake systems (Like wheel cylinder diameter) but this may help. I'll be happy to take any other pics you may need just PM me.
 
Back
Top Bottom