Renewed bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 3, 2006
Threads
130
Messages
8,093
Location
Medford, OR
Well I finally broke down and bedlined my bumper. It was starting to look pretty sad.

Here's an old pic of it. The road rash was much worse than shown. And then imagine how it looked after a couple of wheeling trips and smacking it on trees and rocks! :eek:

(Click for bigger image.)





I went a slightly different route. I used Duplicolor (which I am extremely impressed with), but instead of bedlining the entire bumper, I went ahead and used Rustoleum semi-gloss enamel for the bumper inserts. I like the way it turned out.

So, without further adieu, here's the final results.






And of course the full body shot.

 
You stay away from her with your 8' 1/0 cable and lube. :mad:

Priceless!!!

I like the bumper. Mine is looking shabby from trail damage too. I am debating whether to do this or just hold out for a shortbus.
 
Priceless!!!

I like the bumper. Mine is looking shabby from trail damage too. I am debating whether to do this or just hold out for a shortbus.

Hard to beat a $10 fix.

I'll eventually get a new bumper, but until then... :meh:
 
Hard to beat a $10 fix.

I'll eventually get a new bumper, but until then... :meh:

True, I am more concerned about the time factor because I need to do my rear bumper as well. It is a lot worse than the front because the PO got in a minor fender bender so the rear bumper was painted poorly by a crummy body shop.

Just one more thing on my never ending list of OCD things I need to do to the cruiser.
 
I am more concerned about the time factor because I need to do my rear bumper as well.

I was actually surprised at how quick it went. I taped off the important bits (front of the truck), wiped down the bumper with windex to make sure it was clean, sanded it down quickly (no need to make it perfect, you just want to rough it up), wiped it down again, sprayed.

The Duplicolor dries completely in about 5 minutes, making it easy to do multiple coats. I just did one fairly thick one.

I'm planning on doing my rear bumper tonight, and if I have time, the body cladding/flares as well. Eventually I will also line the cargo area floor of the truck.
 
Did a bit more work on this the last few days.

Here's the side that's yet to be done (and trust me, this was the nice looking side! :eek: )





Here's the side that's (nearly) finished. Just have the rear quarter panel left to do.






I decided to go a bit different route and leave the factory chrome strips. I like the contrast it gives.

And here's a comparison shot of the bed liner VS the factory color. It's actually quite close, just a few shades darker. I also very much like how the Duplicolor gives a very smooth finish.




I'm about 1/2 to 2/3rd through my third can. Looks like it'll take me about 5 to 6 cans to finish. I have the driver's side and the rear bumper to finish, in addition to the passenger's rear quarter panel.
 
i have a 96 LC that has the same original color scheme. i was planning something similar, but i was going to tape off around the fender flares( so the paint lines would stay) and paint everything with the med/dark metalic "hammered" paint. then paint the factory wheels with a darker shade of the same paint. i thought the dark green and dark grey would look nice. your rig looks great with the new skirt! its amazing how little it takes to spruce it these things up. great job and good pics. thanks.
 
If you keep working on that truck you wife won't know trail carnage from mods!:doh::lol:

JK.

Looking good. After my season ends I may start working on my list of things to do. I am just collecting ideas based on your experiences.:hhmm:
 
If you keep working on that truck you wife won't know trail carnage from mods!:doh::lol:

That's kinda the idea! :idea:


Looking good. After my season ends I may start working on my list of things to do. I am just collecting ideas based on your experiences.:hhmm:

So when we gonna make you a skid plate? :hhmm:
 
(Almost a) year later follow up.

Original picture:

DSC_0170.NEF.jpg



Here's how it looks after a year. You can see the end cap that I sprayed with Duplicolor. Shows a nice contrast between the new and year old. Personally, I like the year old. It's so close to the original grey that most people don't even realize I've only sprayed one side of my truck! :lol:

DSC_0248.jpg


DSC_0249.jpg



All in all I'm really happy with the Duplicolor. It's held up extraordinarily well, with the exception of where I didn't get it on thick enough and it got chipped off by gravel. (My tires tend to live up to their name. :o )

While it has faded, it's only faded to a lighter shade of grey that I think still looks great. Maybe even better than the darker shade. It hasn't lightened up noticeably over the last 3-6 months, so I doubt it'll change any further from what it is.
 
Looking good! You can buy some pretty decent clear coat in spray cans these days too. Might be worth spraying it over the top for some UV protection.
 
Looking good! You can buy some pretty decent clear coat in spray cans these days too. Might be worth spraying it over the top for some UV protection.

I may end up doing that. It looks good after a year, so I think I'll probably just leave it. If I have to do a quick coat on top every couple years, not a big deal. ;)
 
Back
Top Bottom