Rear tire clearance

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 21, 2004
Threads
73
Messages
597
Location
The Rockies or the Andes
I am making frame mounts for my roll cage and I am wondering if the rear tire will clear this. Its the mount right behind the seat. Its not complete yet, I have to weld in a plate and gussets from the C channel to the plate clamped to the frame.

Heres pics with the weight on the springs, think the tire will rub?
PICT0061.webp
PICT0063.webp
PICT0064.webp
 
Yep. I think you're gonna rub. One possible solution is to trim the "lip" off the rearward edge I don't think the tire will hit the front part. I'm thinking of the wear marks in the wheel wells of my 40 and if you trim off that rear edge I think you'll be fine.

The other issue now is since you're going to your frame AND it's connected to your body, you run the risk of the bolts tearing through your body when the body flexes. Well, you probably won't tear the bolts through since they'll be caught in the upper and lower plates. But I can see you getting some cracks in the body in other places because of it. 40's notoriously (and most people like it) have quite a bit of frame flex.
 
This is where mine rubs on a not too technical trail. My axle is also moved back 4 - 5" from it's stock location so move that forward on a stock one. It will rub, suggest taking it out, get some dry mud on it, then flex, that will show you what you need to trim.
tirerub.webp
 
Looks like you've already got your mounting assy. figgered out. I think it would look better & easier to fab using tube. You may want to give Ryan at Wickedfab a call. He has a cage to frame tie in kit for $80.00. Maybe you can get him to send you pics, cuz I didn't see any on his site:
http://www.pirate4x4.com/forum/showthread.php?t=351658
 
I like the tube idea, didn't think of that. Based on Poser's pic it looks pretty straightforward. Thanks!

Whats a good way to sleeve and bolt to my frame? Does someone make steel sleeves I can just weld in?
 
Back
Top Bottom