Rear ladder specs?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 16, 2014
Threads
31
Messages
318
Location
Seattleish
Looking for measurements/dimensions on rear swing-out-mounted ladders. I'm wanting to fab up a DIYer and am hoping for suggestions on material, tube thickness, radius at the top, center line of the bend, etc.

Thanks!
 
Looking for measurements/dimensions on rear swing-out-mounted ladders. I'm wanting to fab up a DIYer and am hoping for suggestions on material, tube thickness, radius at the top, center line of the bend, etc.

Thanks!
So you want plans basically?
 
If anyone has plans/drawings they want to share I'll take them, but mostly looking for feedback from people who have rear ladders: do they like the material choice, or wish it was thicker/thinner? Do they like the radius at the top, or do they wish it was wider/narrower? Do they ever actually use the ladder, or is it just a cool doodad to add for looks? I've got a rough sketch/mockup I am going to post up once it's done for input.

I have quite a bit of steel tubing in various dimensions, so I'd rather fab something myself than buy an existing product.
 
I have a Gobi on my 80 series that I love and bought even thou I have mad fab skills. I did a drawing, not very good but you should get the idea. Maybe if you contact Gobi they can send you the CAD file.

upload_2018-7-3_13-42-33.webp
 
I have a Gobi on my 80 series that I love and bought even thou I have mad fab skills. I did a drawing, not very good but you should get the idea. Maybe if you contact Gobi they can send you the CAD file.

View attachment 1736275

Hey, how did you get my drawing? Or maybe great minds just think alike...
 
You should have watermaked the drawing to keep potential 4 year old copy cats from stealing the design.

Excellent point ever one wants credit for the good stuff without doing anything.
 
I used a piece of 1x.188 and 180* turn with a CLR of 16"--the material felt too small, and the radius felt too big...Will try again with 1.5x.188 and a CLR of 12" and see what that looks like.
 
Unless you are climbing on top of the roof for some reason it is pretty pointless. When putting something on the roof (which rarely happens for me) I use the sliders, stand on a tire, or stand on the tail gate with the upper hatch closed.
 
Unless you are climbing on top of the roof for some reason it is pretty pointless. When putting something on the roof (which rarely happens for me) I use the sliders, stand on a tire, or stand on the tail gate with the upper hatch closed.

Thanks for the input @chap79. I am thinking it will be integrated into the jerry can holder (similar to your setup) and I think I'm going to try and make the top portion removable--probably a sleeve setup with caps for when it's removed. I've never had a rear ladder before on any of my previous 80s (and have never thought "oh no, if only I had a rear ladder") so we'll see how motivated I actually get on this :)
 
Thanks for the input @chap79. I am thinking it will be integrated into the jerry can holder (similar to your setup) and I think I'm going to try and make the top portion removable--probably a sleeve setup with caps for when it's removed. I've never had a rear ladder before on any of my previous 80s (and have never thought "oh no, if only I had a rear ladder") so we'll see how motivated I actually get on this :)
A sleeved setup would be cool. I was just thinking today that I need to buy some plywood and miss the days I could just shove it in the rear with the seats folded and leave the hatch open.

The only thing I use the top of my ladder for it to mount my propane tank to :meh:.
 
Unless you are climbing on top of the roof for some reason it is pretty pointless. When putting something on the roof (which rarely happens for me) I use the sliders, stand on a tire, or stand on the tail gate with the upper hatch closed.

Totally agree here. And if you need even higher, crank down the rear windows, close the door, and stand on the window sill. That's worked for me.

Ladders are like snorkels.
 
Use my ladder ALL the time. But, also have a full-size ARB rack, and there's always something being hauled up or down from the roof. Also, routinely sleep up top when camping (ladder especially nice after too much camp whiskey).

Step rails are 1" OD (perfect)
Step rail width is 9.5" (wouldn't go less)
Side rails are 1.75" OD (could be 1.5", but 1.75" makes sense when ladder also holds 3x Jerry cans & bracket)
Not sure of material thickness.

Don't have or need a dorkel. Do have and need a ladder, but its utility would be much less without the roof rack.
 
Other than the obvious, what is the purpose of the ladder? i.e. climbing on and off roof, access to RTT, getting boxes off the top?

Reason I ask, if you don't need to climb up on there, you may be better with sliders, and a rear bumper with wings/steps, or/and maybe incorporating a step into a rear swing out tire attachment. I have the sliders and rear bumper with wings/steps on it and it seems to be ideal for accessing the roof, my RTT has a ladder so it seems the ladder attachment would be with limited function.

Just curious what your plan is, and a hatch mounted ladder seems kinda well, better for the JDM market than my heavy arse.
 
A sleeved setup would be cool. I was just thinking today that I need to buy some plywood and miss the days I could just shove it in the rear with the seats folded and leave the hatch open.

I hadn't thought of that, but it would increase the utility quite a bit in those situations. When we're back road cruising I will pop the rear hatch to let the dogs stick their heads out too.

Use my ladder ALL the time. But, also have a full-size ARB rack, and there's always something being hauled up or down from the roof. Also, routinely sleep up top when camping (ladder especially nice after too much camp whiskey).

Step rails are 1" OD (perfect)
Step rail width is 9.5" (wouldn't go less)
Side rails are 1.75" OD (could be 1.5", but 1.75" makes sense when ladder also holds 3x Jerry cans & bracket)
Not sure of material thickness.

Don't have or need a dorkel. Do have and need a ladder, but its utility would be much less without the roof rack.

Awesome, thank you for the measurements--I was originally going to try 1.5 for the uprights, but I have 1.75 on hand, so will upscale to that instead. I also have an ARB rack, so the ladder should see some use. Also, I want to put some kind of notch (or other attachment point) on the top rung, and be able to use it as one point of attachment for a hammock or a clothes line.
 
Last edited:
Back
Top Bottom