Rear heater removal.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 7, 2016
Threads
18
Messages
186
Location
Colorado
I found this Alpine, all in one, sub.
It seems like a perfect fit under passenger seat.
My question,
Can I just use one of the rubber hoses to recirculate the coolant under the rear heater? So that when I pull the rear heater, the coolant will constantly recirculate, which I'm assuming prolly does already.

image.webp
 
Bypassed my rear heater at the firewall.
 
What you are saying will work fine, but I think you'd be better off bypassing in the engine bay. Those long metal lines tend to rust underneath the truck and eventually leak.
 
What you are saying will work fine, but I think you'd be better off bypassing in the engine bay. Those long metal lines tend to rust underneath the truck and eventually leak.

Is that the two inlets at the very top of the firewall?
 
Bypassing it under the passenger seat makes sense in that you could reinstall the heater if you chose, and the additional links of pipe that it goes through would impact cooling IMO.
 
Bypassing it under the passenger seat makes sense in that you could reinstall the heater if you chose, and the additional links of pipe that it goes through would impact cooling IMO.
I too would think that the cooling system is designed the way it is for reason. Bypassing it at the firewall could change the running temp. Maybe?
 
Currently my 80's rear heater is bypassed under the floor between the first and second set of heater pipes, second set were removed due to corrosion. Actually the hose is kinked so nothing is flowing. Drove another vehicle with the rear heater pipes bypassed like that for 15 years, not a problem. Living in Colorado wouldn't you want the rear heater functional in winter?
 
Either way will work, but if you have any corrosion on your 80's underside, then I'd lean towards the firewall as being more "bombproof" so you don't need to worry about the underbody hardlines.

Otherwise should you develop a leak down there, it may not be as obvious to catch it quickly. You can leave the hardlines in place, just reroute up on the firewall.
 
Currently my 80's rear heater is bypassed under the floor between the first and second set of heater pipes, second set were removed due to corrosion. Actually the hose is kinked so nothing is flowing. Drove another vehicle with the rear heater pipes bypassed like that for 15 years, not a problem. Living in Colorado wouldn't you want the rear heater functional in winter?

Nobody sits in the back seat.
Rear heat isn't needed. (Else I wouldn't consider taking it out.)
 
Either way will work, but if you have any corrosion on your 80's underside, then I'd lean towards the firewall as being more "bombproof" so you don't need to worry about the underbody hardlines.

Otherwise should you develop a leak down there, it may not be as obvious to catch it quickly. You can leave the hardlines in place, just reroute up on the firewall.
No corrosion, it's a Colorado LC.
And YES, I would know about a leak. My wife would make sure to let me know that there were "some sort of stains" on the driveway. ;)
 
I agree with the others; bypassing at the firewall might be a better long term solution. If the second section of rear heater pipes is corroded the first section is probably not far behind. The rear bypass under the floor was meant to be a quick/temporary fix as my long term plan was to install a new set of pipes (second section) and put the rear heater back in service, but the temp fix has held now for over a year.

I first removed the second section of corroded heater pipes then removed one of the rubber hoses on the first section of pipes that runs between the first and second sections, then bent the remaining original hose over to the other pipe and put a couple of Breeze clamps on it. If you could find or fashion a U pipe you could leave both hoses attached and just connect up the U-pipe to the original rubber lines that come off the first section of pipes under the floor. FWIW.
 
Back
Top Bottom