Rear Hatch Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 8, 2008
Threads
3
Messages
6
Hi Everyone,

The rear hatch on my 94 FZJ80 dosen't close flush to body. All the lines on my TLC are straight as an arrow and it's never been in any accidents that I know of.

After looking at the hatch latch it seems to have 2 positions. The fully closed position seems like it should pull the hatch completely closed and flush but I don't know how it's activated.

Does anyone have a fix for this?

IMG_8586.jpg


IMG_8587.jpg


IMG_8588.jpg


IMG_8589.jpg
 
mine is the same way, and the same color: coincidence?

I live with it now after fiddling with the strikers and latch and whatnot and only getting the thing to latch loose or way tight, never seemed to be flush. :meh:
 
My Toyota Previa had the same problem due to an hit in the rear. I picked up a new striker, took it to my local machinist and had him slot the holes to allow for adjustment. Worked great.
 
I too had the same problem with my white '96. I simply removed the Toyota latch bolts on the top of the tailgate and replaced them with non-tapered ones. I adjusted it in a few minutes.

Do you mind elaborating a little more on this fix?


I have the same problem with mine. I have messed around with adjusting the strikers without luck.

I think the root of our problem lies within a warped/bowed out tailgate. These tailgates don't take much to bend in the middle, and I think this is what the problem is.

Cruiserdan and others have bent them back and added a thick piece of stiff aluminum to the lower gate. I think this mod might solve our problem. IIRC obtaining the right kind of aluminum can be quite difficult, but the result is awesome. Check out Dan's rig with hundreds of pounds of WWII ammo stacked on the tailgate that he had left over from when he stormed the beach in Normandy.:cool:
 
Back
Top Bottom