quick starter rebuild question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2003
Threads
490
Messages
9,928
Location
North Cadillac
rebuilt my starter yesterday and reinstalled. Not a big deal.....but for some reason i woke up last night and was thinking i didn't install the plunger correctly. Reason i was thinking this is because when i pulled the old plunger out, i think i remember it being seated down almost touching the contacts. I put the spring on the new plunger and lowered it down, but it was springing up not touching the contacts. I mashed it down thinking it would stay, but it didn't, so i put the top back on and tightened down the 3 bolts and put it back on the truck.

I can't start the truck yet because i'm waiting for a freeze plug but now i'm worried the plunger was supposed to be seated.

Someone please lay my fears to rest and tell me i did the rebuild correctly?
 
everything is fine. The plunger should be raised off of the contacts and when the solenoid gets energized it pulls it down onto them.

Go back to bed

Thanks, that's what i needed. :cheers:
 
I know what a freeze plug is, just trying to understand why you need to replace it. I am sorry that I asked.

Sorry, didn't mean to come across like that. :o :doh: I got like 8 pm's asking me about it.

:cheers:
 
What's a freeze plug? I thought we were talking plungers...

plunger.jpg


I'm going back to bed...
 
No s***.
 
Back
Top Bottom