PTO Winch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

i have been using the pto winch on a 40 since 1971 i am a big fan of wire rope .things happen when you are stuck and some times time matters .worying about set up so you dont damage the rope is another head ache you dont need .or that one rock may be in the way and you have to drag the cable accrosed it .just my o2 from an old school guy
 
i have been using the pto winch on a 40 since 1971 i am a big fan of wire rope .things happen when you are stuck and some times time matters .worying about set up so you dont damage the rope is another head ache you dont need .or that one rock may be in the way and you have to drag the cable accrosed it .just my o2 from an old school guy

I live in dry AZ and less worried about rust of a steel cable than dry rotted synthetic rope. Had a government job that required using safety equipment that included synthetic rope. According to OSHA all the safety equipment needed to be replaced every five years. Depending on what part of the country you were some things last better than others. In the Southwest metal holds up better than synthetic materials. See plenty of suppose lifetime guarantee fabric awning on buildings dry rotted in less than five years from the UV. People aren't looking for FJ40s from AZ for our uncracked padded dashes and like new seat upholstery. Have steel cables I still trust that are over fifty years old. Maybe if a synthetic rope was stored inside in the Northeast I might trust it. Even inside here with the low humidity it would be brittle.
 
Length is listed in the early manual as 50m (~164 ft) of 8mm (5/16") steel cable, plus chain and hook.

Screen Shot 2018-07-31 at 12.54.45 PM.webp
 
Does it look like this? If so, pm me and I can send you a copy of the paperwork shipped with them new in 1963

View attachment 1757427

View attachment 1757429

Would you be willing to sent a copy my way. Hard to tell but my Avatar has one on it. Not sure but could have been off the 1963 the original had before buying the 70 FJ40. It won't surprise since he still had the original toll kit and hub caps from the 63. Also have a FJ25 that came with one as well. Those both have the correct lever. Can snap a picture of the one on the 70 FJ40.
 
Picture of accessories page from a old Toyota dealer's manual.
IMG_20180810_101133593.webp


Also a few of the Ramsey winch on my 70 FJ40.
IMG_20180810_101240470.webp
IMG_20180810_101804423.webp
IMG_20180810_101253275.webp


The manual isn't date, neither is this page. I'm not sure the difference in the R and L in the Ramsey model number. I have another Ramesy winch that was on a 1960 Cruiser in another location I'm curious about both the model and serial number.
 
I did go with a synthetic rope instead of a cable with 3 feet of chain at the end. I know everyone on the forums said to go with cable but I like the rope look. I did pull out about 6 small stumps from our beach over the weekend and it was a lot of fun. Again thanks for all your help. Ill try to post a video and a few photos!
PfsYt5+sRvyDiBc401xwIA.webp
hzE3iUoGQH2EIFwFla14OQ.webp
G8fLCUvsRBi9VymucVZjRg.webp
 
Back
Top Bottom