PS- 69 Chevelle... will it work?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 6, 2003
Threads
43
Messages
133
Will a 69 Chevell PS box work for a cruiser mod? Does it have the 4 turn ratio? Is there somewhere I can find this out other than asking here? Is there a way I can quickly determine in the future if other boxes will work? Is it absolutely nesisary to have the 4 turn box? why won't the 3 turn boxes work?

Thanks,
mike
 
Also, I'm having a hell of a time finding any boxes with 4.25 turns...? All the one's I'm finding are 3.
 
i don't think it maters i think mine is 2.75 or something under 3. can't remember , it just makes the truck feel a little wild on the highway . very touchy steering at high speeds . i think people usually are just looking for a steering box that mounts with 4 bolts . instead of three .
 
A 4.25 is reccomended because it is safer on the highway, that is the only difference in the 4 hole mounting boxes - I gave up after a long day at the junkyard and used one off a Nova or Malibu or something, 3.5 turns and it's a little sketchy at speed but my junk is slow.

Use it and when it goes out, the core will work at the parts store for a 4.25 turn box.

Just make sure it is a 4 bolt pattern for mounting and run it, it will work but isn't considered the "best" option
 
Here's a link for saginaw info...

http://www.chevelles.com/techref/ftecref29.html

If you already have the chevelle box go ahead and set it up. It only takes a few minutes to swap it out for a different box.

As others have mentioned you don't have to have the 4-turn box. I prefer the box out of a J-20. It has a larger (3 1/2" compared to 3 1/8") piston which provides more steering power at the same hydraulic pressure. It is also the same box used by AGR and others. By the way it bolts up exaclty the same as the chevelle and malibu, etc...
 
thanks for the link. From looking over the ratios it looks like the 17:1 would be the 4 turn I guess?
 
I run a 4.25 3 bolt box out of an 80s XJ. I looked for a 4 bolt 4 turn box forever, and then settled for a 3 bolt. I talked to many jeep folk that run the same box and wasn't told that they ever had a problem breaking the actual boxes, they just had a hard time keeping the unibody that it bolts to together. That being said I plated both sides of my frame with 1/4". I have wheeled my truck hard and have never had a problem with this setup.

I would say to try and stay 4 turn as it even feels a little fast at times.
 
You took parts from a HEEP for your cruiser? Wow....:)

Thanks for the tip/
 
4.25 turns lock to lock is 20:1 ratio mostly found them from pre 70's pontiacs theyt also have the larger input 13/16 .Chevelles sometimes have 3 turn boxes in them. The casting # is the same though (confusing) best way is to check the ratio manually.
 
Got my 4.25 off a 69 GTO. Works great! Keep looking on ebay, that's where I found mine. 15 bucks plus shipping!
 
Back
Top Bottom