Procomp Shocks - HELP

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 19, 2006
Threads
27
Messages
140
Location
SLC, UT
I am in the process of putting new shocks on my truck, and found that Procomp has some good prices right now.

Would any of you put them on your truck? Or should I just go with what has been proven, like old man emu? My truck has 6" of lift and is used mostly for street and expidition driving.

Please help me decide I need to place the order this week!
 
If your gonna hardcore wheel it then go for it. They have a lifetime warranty. So if you plan on busting shocks then I say go for it.
 
Jason,

First, I would ask what model you are looking at. This really depends on whether I would say yes or no. Remember this is just my opinion but I do not feel that there lower level (1000 and 3000) shocks are any good. I have had bad experince with both of these. I have however been happy with the 9000's ( I would compare these to the Rancho 5000). They also have a line called the MX-6 which is suppose to be pretty good. As for them carrying a Lifetime Warranty, sure but you still have to R/R the shocks not to mention the downtime to do this. The 4 Wheel Parts here was great about swapping them out they just didn't cover labor.

IMHO unless the price differnece is considerable I would stick with the tried and true for these trucks.

Note: All my experience with these have been with Ford trucks and never with the LC.

Glen
 
I just put two Pro Comp 3000 shocks on the rear of my 80 because no one could get the OME's for the "J" springs.
They have been fine (so far) the 3000 is no where near as heavy duty as the OME, so i really don't expect it to last.
So far, the ride is great and the shock seems to be doing a good job (just a little firm)
I only have about 150 miles on this setup and 0 trail miles... not to mention that my OME shochs just came in...... Things may change, but I think I am going to keep the Pro Comps on until I need to take them off.
YMMV
 
Not on an 80 but a friend of mine used the MX6s on his Scout. Compared to the RS9000s I used to run they were a much better shock and better built. I wouldn't hesitate to try them.

Old Man Emu shocks are OK, and they work with their system fairly well. I use them and I'm happy, but I often wonder how much of the shock price is shipping. It is my understanding they go from the US to Australia and then back. Maybe this isn't the case anymore? But I sometimes wonder if I actually paid $70 for a $30 shock.
 
Thanks for all the information. It is looking like I might try them out. I too have used them but, on my fj40 and they seem to have held up ok. One benifit to them is they come in may diffrent sizes, so I could get an extended lenght with out a problem. But on the down side I will have to get the adapters.
 
I have the Procomp 9000, and with my limited experience, they seem to be fine. My tech at 4 wheel parts matched the size with the J springs I had. Definitely a better deal than the OME, but the OME are what most are using.
:beer:
 
I have the Procomp 9000, and with my limited experience, they seem to be fine. My tech at 4 wheel parts matched the size with the J springs I had. Definitely a better deal than the OME, but the OME are what most are using.
:beer:

Did you have to install the shock adapters, or did they come with the 'post' style attachment? Thanks for your input!
 
Back
Top Bottom