Powder balancing = smoother acceleration? WTH?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 27, 2003
Threads
147
Messages
2,610
Hey .. :beer:

Spring = time to renew my rubber/wheel situation.

I had been looking at new Iroks and 20 wheels, and then regained my senses when the estimate came in over $3600. $%^ that!

So I went black ... Black Trench and simply threw new Iroks on the front, as the rears were fine it seems. Note to self: Regardless of mileage, start rotating yer friggin tires as the fronts wear. They seem to wear far quicker than the rears.

The guy didn't want to slap loads of lead to the outside of the wheels, and someone suggested powder, so I thought I'd give it a try. Now for the really wierd part.

The wifie and I (sans dope :flipoff2:) will swear on a stack of bibles that this rig runs a lot smoother than it did before the change. I don't get it. We took it down and back on the freeway, and on the turnaround we had to head immediately uphill from a dead stop. Now, I've grown accustomed to what this rig is capable of in terms of speed *snicker* I'm a fraction above sea level here, and it's probably only due to this fact that I can beat the Yugo next to me 20% of the time. But now the 'lil ricer next to me quakes in my shadow.

Ok .. not quite.

But definately a much smoother acceleration. Especially off the line. I feel it in the throttle, and she expresses it as less of a lumpy sensation as we take off.

Anyone lend an explaination to this? Is there some change perhaps that the powder has this sort of side affect due to it's unique(ish) ability to dynamically balance?


Oh .. and the really, really odd part is that all the time this 80 has been feeling it's just experienced a 4:88 gear swap, I've been driving around with the old wheels and 3 other Iroks in the truck. Maybe the extra weight? Ja .. r.i.g.h.tttt

:confused::confused::confused:


T


PS: Pics of the sick 'new chrome' to come when my paypal star clears. :beer:
 
No idea ... I was reading travel mags in the showroom. Most remote Starpukes curb is where again? :D

Here's a 101 though FYI ..


T
 
you sure they don't have you smuggling something for them?

My thoughts exactly!

I've got a buddy that runs powder in his F350 and swears by it.

Once I get the 80's wheels powder coated, I'll swtch to powder over the 75+lbs of lead weight the schmucks at the tire shop stuck on last time.:mad:
 
Sorry Tyler

Can't get past the wife part:eek:

Congrats and when did you get married
 
T Y L E R is back!!

I tried the powder (equal) and really didn't like it. Went to dynabeads from innovative balancing. I seem to like it a lot better. I still get an occasiional wobble after the rig has been sitting over night or during a turn, but for the most part it's not bad. I still think i may go with a couple of weights in addition to the beads just to get a total balance. HTH
 
Welcome by Ty!

I ran 37" MT/R's on my 40's and balanced with equal. They ran pretty dang smooth up to the 75+MPH range.

A lot of semi's use this technique as well and they go MUCH more mileage that we will ever do :D

congrats on the :princess:

PICS! (of the tires) :)
 
I think the answer is - your tires are balanced now :flipoff2:

Welcome back, welcome :princess:.

Apparently powder can lump up with moisture, take a look at Dynabeads long term.
 
I think the answer is - your tires are balanced now :flipoff2:

That, and that they're new.

Putting brand new tires on a rig that had big, old, neglected ones on it previously makes the whole rig handle noticeably better in every way: Cornering, starting, stopping, you name it. People often say, "Wow; it feels like a completely different rig!"

Cheers,

Curtis

P.S. There's been some weird talk in chat lately about you and a cat... :hhmm:
 
Back
Top Bottom