Portland Metro Classifieds (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Any interest in a set of 4 Maxxis Bighorn 32x11.50x15LT? Good tread, can measure depth if there's interest. Looking to go to 31" KO2s and suspect someone else might make better use of those mud-oriented Maxxis.
 
I do still have them. Theyre yours if you want them.
I am sorry I thought you posted that these were gone and I hadn't been on here since then, now rereading this thread I see it wasn't you that posted that at all, I image now I am too late, or did you hang on to those?
 
Also seeking a new-style ARB front bumper/brushguard for a 60, I've been cruising Craigslist for a while but haven't seen anything pop up.
 
@cheeese - I am also in the market for a new ARB front bumper. I wonder if anyone else wants one and if we can get a cheaper rate if we buy as a group?
 
Even if we save on shipping or get them through a local outfitter it would be worthwhile. Good call!
 
I have some goodies for sale that might be of interest to local 60-series owners!

Tired of wind noise? I have two unused OE inner window seals (p/n 68170-90A01) for sale at $35/piece. These will fit on either of the front doors, are easy to install, and help create a better seal against wind coming in around your windows.

I broke down and purchased an ARB front bumper (sorry @cheeese!) so I'm selling my old chrome OE bumper from my 1990 FJ62. The chrome is in good condition and the bumper is pretty straight, though it needs a good polishing and new end pieces. Asking $100 OBO. Chrome OE bumper is SOLD

Kx1OKd8.jpg


q3EMglO.jpg


I'm also selling my old push bumper of unknown origin. This thing is designed to be installed over an OE chrome bumper which unfortunately means it won't allow a winch. However, it should be a good way to add some additional protection to your frontend while you save up for the winch bumper of your dreams. Asking $200 $100 OBO.

7KpNmrm.jpg


Wg1xxyv.jpg


BDwc2eR.jpg


PM me if you have any questions or want additional pictures.
 
Last edited:
@Rustic76 - nope, these are the felt lined weather-stripping parts that sit between your window and the door card. I accidentally bought a duplicate pair when I was shopping for the actual window runs.
 
I'm looking for a full float 60 series rear axle or potentially an 80 series FF axle if its the right price. Id like to upgrade my rear axle so I'm not worrying about breaking a shaft every time I wheel.
 
I also have a extra spare 33x12.5r15 Firestone Mud tire on a toyota bolt pattern wheel - $25 - need to get it out of my shed. Would love to see it go to another cruiser enthusiast.
 
updating this to include a choke cable and Two glove box doors. I'll keep everything until this weekend and then it sadly goes to the recycler.

Adding a pair of H4 headlights and bulbs. I dont know their origin but they've never been used. Came with my 60 in boxes.
 
Lowered the price on my Tundra: 2017 Toyota Tundra SR5 DCSB 4x4

Here is your chance to buy my dream truck! I bought this truck in Aug. 2017 and had Wilsonville Toyota do all of the work on it when I bought it. That means that all of the modifications are covered under the factory warranty. Maintenance has been done though ToyotaCare at Wilsonville Toyota since new. There is still free maintenance at any Toyota dealership for another year. The truck currently has 22,700 miles and is not being driven.

Vehicle features include: 5.7l i-Force V8 (381 hp / 401 ft-lbs), 6-spd automatic trans, part-time 4WD, A-TRAC, Auto LSD, Tow pkg (hitch, 4.30:1 axle gears, engine & trans coolers, HD battery & alt, intergrated 4/7-pin connector, trailer brake controller with sway control), rear backup camera, 8 airbags, tire pressure monitor system, easy lower/lift tailgate, 40/20/40 front bench seat, Entune Audio Plus (AM/FM/HD/SXM/CD/USB/Bluetooth), A/C, Pwr windows, pwr locks, heated mirrors, all weather floor liners, and chrome exhaust tip.

Aftermarket parts include: Southern Style Off-Road Hybred front bumper with LED light bar, Revtek 437 2.5"/1.25" lift kit, 275/70R18 Cooper Discovery STT Pro tires, 18" Fuel Vector wheels, tinted windows, Lund roll-up tonneau cover, Bullet Liners spay-in bedliner, N-Fab steps, and debadged. (Comes to over $5,000 in aftermarket parts alone!)

Like I said, I bought this truck brand new and had it outfitted to my dream truck. I have to sell due to changes in the family. As much as I LOVE this truck, family comes first. My loss, your gain. PRICE LOWERED TO $37,000!!! The truck is financed through Oregon Community Credit Union.

DSC-0001.jpg

DSC-0002.jpg

DSC-0005.jpg

DSC-0010.jpg

DSC-0011.jpg

DSC-0013.jpg

DSC-0014.jpg

DSC-0015.jpg
 
Last edited:
1968 Toyota FJ40 Land Cruiser

Letting go of my project to make way for a new baby. I just don’t have the time and money to finish.

Very clean tub with no rust holes!! Low mileage 10067353 Goodwrench 350 V8 engine, TH350 transmission that is supposed to be rebuilt (never ran), 203 crawl box/adaptor, stock Land Cruiser t-case, 3” body lift, MAF shackle reversal kit, FJ60 outers on the front axle, Saginaw power steering, 37” bias Iroks on 15” wheels. Needs rear brakes and all systems plumbed and wired. Comes with a lot of parts. Must see to appreciate. Clean title in hand. Will not part out.

Asking $5,500 but may consider part trade for older 4x4 Toyota pickup or 4Runner that isn’t a project.

20181004-205248-1.jpg

20181004-205225-1.jpg

20181004-205104-1.jpg

20181004-204948-1.jpg

20181004-204933-1.jpg
 

Users who are viewing this thread

Back
Top Bottom