Piggie Specific Gutter mounts and Racks

[TRAIL TAILOR]

Ok guys you've been asking and I have FINALLY worked these in to the R&D and production.

Piggie specific height gutter mounts and custom rack mounts and roof racks... I will sell these as pieces or full turnkey products. Just PM me with your inquiry.

This is this first of a few Piggie production parts. I will build the racks to your specs or a standard old rack if that is what you want. 1/2 .. 3/4.. full length..

Ron, @scrapdaddy Thank you for all your help on the measurements. @npulver we need to talk....

I should have the rear and front bumper designs out shortly.

Thanks again guys,

Jason

 

[scrapdaddy]

Jason,

Parts look good. Can you tell us what the rack is made out of, size of tubing, etc.

Thanks,
Ron

 

[TRAIL TAILOR]

Do you have a picture or two of how these might be used?

My brain isn't getting it

I've got a two pairs of SOR ones and think I want at least 3-4 mounts per side.

They still need to be finished out. I'm waiting on the angle clamps from the laser cutter. Here ya go.

J

 

[TRAIL TAILOR]

Jason,

Parts look good. Can you tell us what the rack is made out of, size of tubing, etc.

Thanks,
Ron

Ron, the rack is made out of 1" x .083" HREW.

J

 

[TRAIL TAILOR]

Cool. Thank you for posting the pictures. Now I'm feeling a bit blond

NAH!! I sometimes take for granted that people can't see what I do and forget to elaborate more... my fault.

Let me know if you have any further questions..

Jason

 

[npulver]

Ooooooooo! You know I've been thinking lately about your bumpers/rack. Didn't you originally live in lower Colorado or something? Noticed now your only like 5 hours away. Might have to take a trip to Colorado sometime and drop off the lamdcruiser.

 

[TRAIL TAILOR]

I'm in Green River, WY.. First R&D piggie gets special treatment, as all first R&D cruisers do.... Bumpers, sliders and rack... for a DARN GOOD PRICE!

J

 

[PabloCruise]

Curse you Jason! How am I going to sell the crappy little rack that came with my Pig if you are going to make these?

Will your mount system take Yakima or Thule bars? Or will your rack take the Yakima accessories?

Nice stuff! If you need a test Piggy next time you are in Northern CO, you know where to find me...

 

[TRAIL TAILOR]

Curse you Jason! How am I going to sell the crappy little rack that came with my Pig if you are going to make these?

Will your mount system take Yakima or Thule bars? Or will your rack take the Yakima accessories?

Nice stuff! If you need a test Piggy next time you are in Northern CO, you know where to find me...

TJ, I'm not sure about the Yak accessories. If there is something in particular, let me know and I will look into fitment. I will be back in early October and if I have time will look you up again.

Jason

 

[PabloCruise]

TJ, I'm not sure about the Yak accessories. If there is something in particular, let me know and I will look into fitment. I will be back in early October and if I have time will look you up again.

Jason

It would be cool if this bike mount could attach to your rack: https://www.yakima.com/viper

Also cool if your mounts took the 66" crossbars if someone had a rack already built... https://www.yakima.com/66-crossbar-single

 

[PabloCruise]

Ooooooooo! You know I've been thinking lately about your bumpers/rack...

Last time I said that out loud, she slapped me!

 

[TRAIL TAILOR]

@Walkerm916 full flat rack is complete.

J

 

[TRAIL TAILOR]

Not a rack, but a 40 to 55 conversion bumper for @Walkerm916

I will build custom frame to bumper mounts for this.

J