Paint my truck

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 15, 2015
Threads
20
Messages
39
Location
Marlboro
does anyone know where I can get a cheep nice paint job for my lx 450 or where I can get the paint restored for a cheap price because it's not that bad
 
When it comes to paint, "cheap" and "nice" do not go hand-in-hand; you get one or the other. Check out paint restoration. If your paint isn't bad, you may find success with a shop that can "correct" your existing paint, which often consists of a combo of wet sanding, buffing, polishing, waxing and sealing. Many folks would be shocked what experts can do with a seemingly failed paint job.
 
I personally think my $53 leftover tractor paint blown on by a Harbor Freight HVLP turbine is nice. But that's my opinion/taste.

11885154_10206626413413481_1675498177206456750_n.webp
 
Honestly, Maaco is just fine as long as you do all your own prep. Of course, that's like 80% of the job, and at that point it's not really much of a deal any more :o If you let them do your prep, you will have overspray everywhere.
 
Honestly, Maaco is just fine as long as you do all your own prep. Of course, that's like 80% of the job, and at that point it's not really much of a deal any more :eek: If you let them do your prep, you will have overspray everywhere.

What does proper prep look like? As in what steps should I take if I were going to Maaco?
 
Tijuana, Mexico. The shop we've used goes light on bondo, works miracles with lead, beatifully smooth and even coats of paint and heavy on clear coat.
So what’s a good shop in Mexico & coat?

My buddy bought a car once that apparently had body work done in Mexico.
Cutting the car up eventually, we discovered the rocker panels were filled with Spanish newspaper & bondo over that!
 
What does proper prep look like? As in what steps should I take if I were going to Maaco?

When I had my car (not my Cruiser) done at Maaco years ago I filled and sanded the dents and dings and sanded down the larger paint chips and scratches. Their practice is (or at least used to be) to hit the whole car with a filling primer/sealer. It does ok on small imperfections but the bigger stuff still shows up. They will fix it if you want but the cost goes way up if you have them do anything besides the paint.
​
I also removed all of the lights, door handles and any trim or weather stripping that I could get off. Basically anything that could be removed that I didn't want paint on I took off. I watched them do the set up and they just tape stuff off, so if you are hoping to get paint behind your headlights (and not on them) for example you better remove them. I had to deliver my car on a trailer since it was not drivable with all the stuff I removed.

In the end the actual paint came out fine. It wasn't going to win any show prizes but it looked good and held up well. They gave me a 6 year warranty on fading and flaking which I never had to use. I lived in So. Cal at the time and did not have a garage. I sold the car to a friend after 4 years and when he sold it almost 10 years later the paint still looked good. Not too shabby for a $300 paint job.

I would use them again, in fact I am looking at having them do my Cruiser in the next year or two. If you're happy with the current color I'd recommend having them match it or pick something really close as they don't do under the hood nor do they do a great job with door jambs etc (those also cost extra).
 
What does proper prep look like? As in what steps should I take if I were going to Maaco?

Basically take everything apart if you're picky. I got overspray on frame crossmember and frame horns, a little on the tires, a little on mirrors and window trim. It didn't bother me because the truck already had a poor quality rattle-can "blackout" of grill and mirrors. But I would take off the grille, headlights, blinkers, taillights, etc, just to not give them an opportunity to rely on painters tape. I didn't do any sanding/body work and the paint came out great, so basically, just try to eliminate any opportunities for them to spray something you don't want painted. :o Overall I was happy with my job.
 
I took off flares, mirrors, the black window trim, bumpers, roof rails and lights. I didn't mess with the door handles, though. Five years after Maaco painted my truck, I'm still very happy with the paint job. YMMV, of course. I think it's all about the particular individuals working on the job and what their skill level and what type of pride they have in their work.
 
Back
Top Bottom