Orion HD

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

DSCN9848.jpg



DSCN9906.jpg



DSCN9907.jpg



DSCN9908.jpg
 
now thats totally uncalled for Wood. Who makes those front and rear housings ? The cover plates and all the allen heads are gay. Rather see some nice grade 8 holding the front housing on.
 
isotel said:
looks pretty Beffy.. what about cost, Advantages/Disadvantages over Atlas 2
anyone know anything or is this just spy shots


Looks Bitchin'
It's probably going to be stronger than an atlas2, but it's going to be MUCH heavier.
The weight weenies won't like that.

I just want one that has a little less gearing than 4.0:1 to run behind my SM420

An overdrive highrange would be awesome too...
 
Atlas 2: $2200 (4.3:1) and includes front dig...but would require a change to a centered rear axle and the additional expense of adapting to your existing tranny choice... ($2500 with 5:1 ratio)

Nothing on cost yet, Vic from AA and I chatted about this 2 weeks back tho....

32 spline front and rear outputs, complete assembled case, only changes are mounting of front driveshaft (I believe - that may be a changable yoke on there too) Effectively eliminates all the potential weaknesses in the current Orion setup, including assembly error.

I'm gonna talk with Vic more, but I'd like to see them create a collar-type addition for the rear output to disconnect the rear from the t-case, allowing front dig.

BTW: I've got grade 8 allens....even grade 8 torx......possible their assembly for SEMA is partly for the <bling> factor too...
 
Looks like a great piece to me! If AA keeps the cost in line I think it will do well. It's great to see AA support us Land Cruiser enthusists and our 25 YO trucks. Might hafta buy one of those Orions if my stock 4-sp case doesn't stand up to the V8/465/Rockbox in front of it! :D

Nick Jennings
 
Should have signed up for sema...

AA was so dissapointing last time tho..
 
Tigerstripe40 said:
Looks Bitchin'
It's probably going to be stronger than an atlas2
QUOTE]


Why do you believe this???

Cases with Front and rear outputs on teh same side are inherently weaker than cases that are direct drive rear..

It has to do with leverage..
 
Mace said:
Tigerstripe40 said:
Looks Bitchin'
It's probably going to be stronger than an atlas2
QUOTE]


Why do you believe this???

Cases with Front and rear outputs on teh same side are inherently weaker than cases that are direct drive rear..

It has to do with leverage..

Cast iron is stronger than aluminium.
 
disadvantages: Heavy, no front dig, yoke style front end, no ebrake, rear output is offset so upgrading rear can't be centered,

advanatages: 4:1 gears, indistructable case(well cast iron anyway), mates to stock 4spd to keep good highway gearing, offset for cruiser rear end....


The only big disadvantage i see is that there is no front dig option and it maybe kind of heavy....it deffinitly looks beefier than a stock D300. I would see if trail tough will make a disconnect for the rear output. Foxfab uses one on his mini truck and it works great....you just gotta LUBE THE THING.

those allan head bolts are alloy bolts which are just as strong if not stronger than grade 8.

I say cool but if it cost the same or close to a 4:1 atlas2 i would go with that...lighter and front dig.

Stew
 
Need a front/both/rear ability in the case to do a front dig or get out when you shatter a rear axle.
Or.. You Woody, blow a cryo'd pinion..
Would like a ebrake disk style like mini's use.. I"ve got 2 or 3 rotors myself waiting on my splitcase, Just gotta build my own mount..
So for the wannakeep it stockers it's also gonna need an input for the speedo as well.. Dunno if that's on there. And theyr'e gonna have to build a cover for the rear output on the Tranny, cause if this is gonna be a universal application not many are gonna have that thing lying around!
I'd recommend a universal speedo hookup or option to not run it.. All toys use a similar setup so that's fine.. But they wanna market this to rovers etc someday right?
 
OH I agree with Stew.. I would rather it be drilled for Cruiser and Mini style bolt patterns on the front and rear.. The rear looks to be 6bolt pattern.. I wouldn't want the springover guys to have to not run a CV on the front cause they purchased one of these.. Keep the ability to run both if needed.. Just buy a different flange? BUt keep the Yota's the ability to run the shafts we have in the shop!
 
What do y'all mean by "front dig". sorry if this is a stupid question...
 
Back
Top Bottom