Opinions Please

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

4" of lift is a lot for a DD rig, but certainly do-able. I drive on 3" lift daily. My kid loves riding in my truck more than mom's car- but he's a boy and boys love big trucks. The running boards will help a lot with kids.
 
I don't like the idea of chucking in $700 for shipping on one far away when that money can be better spent!

It may be an even wash. Those are some aggressive tires for a DD as well. If you find a southern alternative you might find it cheaper and easier to fly in on a Friday night and drive one home instead of shipping. I flew to Wash DC to buy mine from a mudder - it's really hard to find a clean 80 in the northeast.
 
Very clean!! low miles, I would buy it.
 
Going up Sunday to meet with Erratic and check out this beast.

What we've talked about as a compromise for the lift is to remove the spacer on the front (leaving the J Spring) and then replacing the rear spring with the OME Medium spring. Erratic estimates this lift should be around 2.5" overall. I think that should be better. Any comments on this setup?

Also, will there be any driveshaft issues in lowering the lift with his new ds?
 
My J lift is closer to 3" with allthe toys I have. I love mine and its a great daily driver.

Put some step sliders on it and you won't need to lower it.
 
It's still got the factory running boards on it so he probably wont need step sliders. For what he plans to use the truck for he probably wont add sliders anyway. I think the truck needs to come down a bit anyway because after removing all the weight I had in the back there is a slight driveline noise. Not there if I add wieght or pull a trailer. I think the rear D shaft is not content with the angle. It should be perfect with the slightly lower springs. I will probably do that regardless.
 
What we've talked about as a compromise for the lift is to remove the spacer on the front (leaving the J Spring) and then replacing the rear spring with the OME Medium spring. Erratic estimates this lift should be around 2.5" overall. I think that should be better. Any comments on this setup?Also, will there be any driveshaft issues in lowering the lift with his new ds?

No issues with the DS. With J's on the front and Mediums on the rear you will be quite pleased. Probably closer to 3".

Sounds like a nice truck for a nice price.
 
Sounds like a nice truck for a nice price.

It is! Now I just gotta sell it so I can get my mog. And I thought the cruizer was hard to find. Try finding the perfect unimog! Theres like 5 for sale in the US and none of them are what I want. The folks in germany dont seem to want to give me the time of day. It's frustrating to say the least.
 
That's nuts. It's easily over 100k. Probably much more than that. Not quite what I'm after! This is more my speed.

20839-how-about-pics-vids-unimogs-35_1242656_65200445625pm.jpg
 
unimog

maybe something like this. i saw this one last weekend recover that stuck bronco....
CIMG2392.webp
 
Looks like a deal! Don't worry about all the "lifted daily driver" stuff. Mine is lifted 3" rear and 4 1/4" front with 315 Nittos on it. The one that you have shown seems to be lifted more, but has smaller tires. Whatever!
My daughter is 6 years old, 40 pounds soaking wet, and is only a bit taller than my tires. She can get in and out on her own when she needs to. I help her most of the time.
Mine is a DD and is a construction truck most days. Evenings and weekends it is the family traveling wagon and wheeling rig. I have no problems at all.
Take them out in it and show them a good time. They will adapt. That's what kids do best!
 
Well, it's officially up for sale in the classifieds. My mog is on the way so I need it gone. I remember when I was looking for a cruiser I was stoked to find this one and I'm sure someone else will be too when they find it. Thanks for all the kind words!
 
Back
Top Bottom