Opinions Please

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2006
Threads
51
Messages
160
Location
Southwestern CT
I'm thinking of buying this rig from a fellow IH8MUD.com member. He is cool with you all giving your opinions.

What I know:

1997
104k Miles
Lockers!
OME J Springs, leveling spacer, L Shocks (rears still to be put on)
Full Front Axle Service done
All seals, grease, new trunion bearings, front brake rotors and 100 series pads
Man a fre front drop brackets
double cardan front driveshaft
Very carefully analyzed and selected vehicle fluids
$11,500 asking price

As you may have seen recently (because I'm looking to make my first purchase) I've been flooding the boards with newbie questions. Well, I'm seriously considering this rig and would love any feedback you could give me. The lift is 4" and I'm wondering if I'll feel that is too high for my daily driver stuff including hoisting small children into their car seats etc. I'm sure it's well on it's way to being an off road beast, but will it tame down enough for my domestic needs? All comments are welcome, the seller shall remain anonymous unless he chooses to reveal himself.

Photos:

http://share.shutterfly.com/action/welcome?sid=1EZtGzZq4YuKg&emid=sharview&linkid=link4
 
Last edited:
Well, the most important thing you left out is: what's the price?

Otherwise, that's a great looking rig. I daily drive a lifted 80 and have 3 kids...no problems, no complaints, wouldn't have it any other way.

Good luck with whatever you decide to do...good that you're asking questions, it's important.

Again, that's a great looking rig.
 
Sounds wonderful, but the price is conspicuously absent. 4 inches of lift is a lot for a DD and kids.

-Spike
 
Looks pretty good. Is it just me or the rear "Full Time 4WD" emblame is missing. Any idea why it's not there?

Is he the original owner? I'd do a compression test, if possible, just to have a point of reference for the future.

11K is a good price.

Good luck:cheers:
 
Sounds like a deal since alot of the PM work is done and knowing the owner cared for it.
 
Is it black or green?

Trucks looks good and has a good start on the "off-road" mods already done.

My only suggestion/concern would be the lift and gettign the kids into and out of the truck. I am only 5'9" with a stock height truck and have no problems getting my daugther in and out but as she gets heavier my wife (5') is starting to have problems lifting her into and out of the car seat easily.

Due to this fact, I will not be lifting mine for atleast another year until my daugther can function on her own.

Glen
 
OME J spring is a spring which is a little taller than the regular lift springs.

The rear emblem is missing because when I got the truck it had the gawd awful gold emblems. I didn't want to spend the money to buy a silver "FULL TIME 4WD" emblem since I didn't really care.

I don't really want to sell it but I need the money for a Unimog. I figure why beat myself up putting in a diesel and unimog axles, when that combo already exists!

Thanks for the kind words. I like how you put "carefully selected fluids." Great way to put it. Hopefully Grillguy likes the truck. If not, looks like I wont have an issue selling it.
 
looks nice. if you want to lower it a bit you might consider removing the spacers on the front and going with regular 863's in the rear. that's what i'm running an very happy. rig does look a tad high with those tires. otherwise appears well cared for and a fair deal.
 
Looks nice (it is black right?).

The steering wheel looks just as worn as mine (with nothing but tender care). Apparently, Toyota leather quality dropped on some production in the late 90s.

I like the custom door speakers - looks nice.

Was the underside painted or coated with something (or just look odd from the photo flash)?
 
Do you guys think I could sell off the J springs and L shocks ( I think they're brand new). I could then use the money toward a new OME stock or 2.5" kit.

Would I need a different driveshaft for the 2.5" kit or will this one work. I know if I go back to stock height I'll need a stock ds.

Can I use the 33's in Stock Height? 2.5" kit Height?

Thanks for all the input guys, this forum rocks.
 
I don't really want to sell it but I need the money for a Unimog.


Erratic: Nice to see a reasonable reason to sell an 80. Good luck with the Mog.

CT GrillGuy: Buying a mudders rig is the best way to go, but it's a PITA to sell a used suspension and swap in a new one - that's a lot of effort to bring the truck lower towards stock heigth. There will be other 80s out there with stock or mild suspension mods to consider. This particular 80 sounds like a great rig as-is, but child seats will be a bit of a daily challenge.

mike
 
Erratic: Nice to see a reasonable reason to sell an 80. Good luck with the Mog.

CT GrillGuy: Buying a mudders rig is the best way to go, but it's a PITA to sell a used suspension and swap in a new one - that's a lot of effort to bring the truck lower towards stock heigth. There will be other 80s out there with stock or mild suspension mods to consider. This particular 80 sounds like a great rig as-is, but child seats will be a bit of a daily challenge.

mike

Good to know, thanks Mike. I'm trying like hell to make this one work, because I havn't seen anything in our area that I'd consider. I don't like the idea of chucking in $700 for shipping on one far away when that money can be better spent!
 
Back
Top Bottom