OME rear spring spacer

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 14, 2013
Threads
13
Messages
105
97 LX450 I have the 860s in the rear and like the way they sit, but I still have a bad driver lean. Bought the truck after the lift was installed and the passenger side tag was ripped but had a B on the part that was left, so I’m assuming it’s on the correct side. Driver side already has a spacer on it. Anyone had to do 20mm spacer on driver’s side just to get it level?
 
I'd contact Cruiser Outfitters and talk through this with them. They are one of the best for any OME related stuff and should have a variety of spacers that could work if you need to go that route. They may also have some other things to check.
 
My truck came to me with an old Ironman lift on it, and it had only one spacer on front left. I know that’s not helpful but... related I guess. I don’t have a problem with it I’ll probably keep it in there until I get new springs
 
I've seen some posts on here where someone had driver side lean and flipped the coil springs and still had the lean. They added a coil spring booster to the driver side rear and that fixed the issue and truck is leave side to side.
 
Back
Top Bottom