OME 250/263 installed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 11, 2016
Threads
9
Messages
67
Location
Snohomish WA
Just got my lift in this weekend. It's my DD and I live in WA where's there's nothing but hills everywhere and I go to the mountains alot, so I'm staying with 285's until I can re-gear. Old shocks and springs were worn out and I needed new control arm bushings so I just opted for a lift. Not going too crazy with it, just wanna have some fun on trails when I go shooting and camping. We'll see how far it goes over time. One thing always leads to another.
IMG_20161003_115826197.webp
IMG_20161003_115854938_HDR.webp
 
Don't know why I wrote 250/263. Meant 850/863. Trying to figure out how to edit but I'm new to this forum
 
You have to have 10 posts to be able to edit.
 
Looks classy
 
Looks classy
Thanks. Was looking at a few 80's when it came time to buy. 2 out of 3 had lockers but we're in real tough shape. Got this one-owner, non-locker from a lady for 3k less than the other 2 with lockers and in alot better shape. Replaced plugs, wires, cap, rotor, o-ring, radiator, fan clutch, engine temp sensor, water pump, belts, heater valve, thermostat, PHH hose, broken headlight/corner lamp. New brakes (including calipers) are next.
 
Looks good! I'd like to lift mine the same as that someday, adding front mudflaps and sliders at the same time. I'd like to remove the stock running boards but I use them so often I can't justify it until I get some step sliders.

I'd say black tie is an apt description, classy but knows how to party.
 
Looks very good. Nice and clean. I'd suggest doing the spare tire lift mod and leaving it at that.
 
Looks very good. Nice and clean. I'd suggest doing the spare tire lift mod and leaving it at that.

Definitely want a 4x4 labs rear bumper w/ swing away, metal tech sliders, and Slee short bus bumper w/ winch to get a little more ballsy on trails. But in due-time, stuffs not cheap
 
Thanks. Was looking at a few 80's when it came time to buy. 2 out of 3 had lockers but we're in real tough shape. Got this one-owner, non-locker from a lady for 3k less than the other 2 with lockers and in alot better shape. Replaced plugs, wires, cap, rotor, o-ring, radiator, fan clutch, engine temp sensor, water pump, belts, heater valve, thermostat, PHH hose, broken headlight/corner lamp. New brakes (including calipers) are next.

Nice rig! My lx450 had no lockers either, but it was well cared for and in really good shape with minimal rust. IMO that is a better platform to start with than something that is OK but has lockers. You can always build it! I have been shocked at what my rig can do with just a rear locker and 35's.
 
Nice rig! My lx450 had no lockers either, but it was well cared for and in really good shape with minimal rust. IMO that is a better platform to start with than something that is OK but has lockers. You can always build it! I have been shocked at what my rig can do with just a rear locker and 35's.

Exactly. Unless you're really going to push it, I don't see the need for using lockers often enough to justify making that a top priority. Stronger air lockers can always be added later.

One of the 80's with lockers I was looking at just had a really nice front axel rebuild done to it, but had a bunch of rust since it was a California car that spent alot of time on the beach, literally had 3 holes about gold ball size at different parts of the body. Was missing carpet, fan made a bunch of noise, paint was terrible, etc.
 
Back
Top Bottom