oil guage

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

landcrusher909

Athlete/Race truck driver/Hobbyist
GOLD Star
Joined
May 6, 2005
Threads
401
Messages
6,290
Location
Southern Calif.
well i have tried grounding out the oil guage and it moves and maxes out so thats getting juice also put in a new sender but i still cant get any reading off the guage i have checked the oil pressure and its fine i would just like to get the stock guage to work any ideas thanks
 
Run an independent ground from the sending unit outer housing to the truck frame. Or clean off any Teflon tape or sealer on the threads that may be keeping the sending unit from grounding.

Also, test the resistance of the sending unit at various pressures, or swap with a known good one.

Steve
 
Is the guage working at all? My 74 oil press. guage starting maxing out and it was the sending unit. I replaced it and all was good. I also ran a T to run a manual guage to be on the safe side. Just my .02

Later,
 
Back
Top Bottom