Officially a Ricer.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 14, 2002
Threads
69
Messages
1,548
Location
Mooresville, NC
Problem: With the Weber and the Warden's adapter, 94 runner master and landcruiser booster- the air cleaner hit the master. It actually BARELY missed, but I just thought that when the engine revved, it would hit it.

I got a 90 degree elbow from intakehoses.com (great service, BTW) with a reducer for $27 or so, used a weber air cleaner adapter to mate to an original air cleaner, and EFI intake tube from a 22RE pickup, and a universal cleaner from K&N. 1 muffler clamp welded to the rad support rod, and PRESTO- I am a ricer with a bootyfab cold air intake.

In retrospect, I probably would have put on an airbox (someone here did it- Mr. Manny maybe?), but I had the pieces lying around, short of the 90 and air cleaner adapter. A stock aircleaner was a no go due to the Power steering.

Thoughts?

Pretty cheezy- but it should work, right? I am by NO means trying for power gains, just wanted to get the air cleaner away from the master. I thought about running it into the airbox, but the K&N sucking noise would drive me insane.
 
Last edited:
dude i like it.made me laugh.definately needs a vtech sticka yo.i might do that as well cause im gonna have the same issues with powersteering.mines gunna say VTECH in bigass letters though:)
 
Snorkles don't work so well around here, when some of the trails are so tight that you have to drop the windsheild to keep from tearing it off. I thought about it, but it would not last long in the northeast.

Like I said, I think routing it into the glovebox would work great, but the noise would be pretty loud.

VTEC-I am sure I can find something comical at a junkyard to toss on there.

The guy at the website I got the 90 at sells stainless intake tubes. That would make the orange and primer black engine bay pop, wouldn't it? OK, maybe not.

I like the "cobra head" style 90, keeps the airflow up, while having a real tight radius. Seemed like a pretty good solution to PVC pipe, and almost as cheap.

Thanks for the compliments.
 
That was a great idea and looks great. The same thing can be done on an FJ60 with a Weber to run the non-USA/FJ62 style air cleaner assembly so that when you get a snorkle you can just attach to the aircleaner in the correct postion. That is what I did on mine (no snorkle yet) with a Weber plenum, but I think yours is cheaper by a long shot!
 
check ebay under intake hose for his intakes. He has tons of sizes and adapters to step up or down. I had to step down from the 3" intake to a 2.5 for the efi tube.

I think the weber adapter for a stock 1 barrel was about $25. I used that one as it has a bigger mounting flange.
 
my old custom one seem to work pretty well, but once i put powersteering i had to take it off.
stuff.webp
stuff (1).webp
 
Back
Top Bottom