Official ONSC member buying/selling thread (23 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

4x 315/75/16 KO2s - dismounted and ready to roll. Wheeled once. A few (maybe 3-4) thousand miles and no blems. Probably less to be honest. Just measured at least 14/32 tread, and 15/32 in most spots (which is the "new" tread depth spec). Pics tomorrow if I don't have to relocate to an ark...

$500 - see edits in post below.

Welp, Houston, we have a problem. Was cleaning some of the URE clay off these tires (why didn't I do that months ago?) and found one tire is damaged in two spots. Obviously, the tire still holds air fine since I didn't find this until they were dismounted and cleaning them. Had to have happened at CRR this year - the one time I've been offroad in forever. Confirmed no damage to any other tires, so I thought it'd be a good deal for someone to buy one new matching tire and have this one as the spare. Dropping price to $500

IMG_1650.JPG
IMG_1654.JPG
IMG_1658.JPG
IMG_1659.JPG
 
I wanna know what caused @fj40z to need new bumper bits. if only it were the front bumper, i could give you that new center section back.
 
I wanna know what caused @fj40z to need new bumper bits. if only it were the front bumper, i could give you that new center section back.

Shhhh. In due time LOL and I might need the front bumper center section also.
 
I am going to have to sell @mtweller 's Grandpa's Shopsmith tools :( I simply don't have the room I thought I did and HAVE to get back some of that room for business reasons, etc.

I have discussed with Ramon and he does not need it back :)

I am shamelessly posting up some of his pics here and the same price of $500.

Included is an amazing amount of stuff to include bound owners manuals, shop manuals accessory manuals, tools, sand papers, sand belts . . and the major tools: Mark V Shopsmith with table saw, scroll saw, jig saw, narrow belt sander, wide belt plane sander, and much much more: YEARS of collected items from someone who loves his tools and took care of them!

band saw.JPG

jig saw.JPG
scroll saw.JPG
Shopsmith.JPG
 
Anyone have this?

Can’t seem to find one. Rear cap for OEM running boards for the passenger side.

39166E66-B0D6-4FF9-AE74-F7A8961CD9EE.jpeg
 
Selling Heather's Avalon $7,200.00
124k miles

2006 Toyota Avalon
Clean Carfax
Silver Pine Metallic
Tan Interior
Navigation, Sun Roof
Push button start, 2 remotes
Heated/cooled memory seats
All power options
Matching Michelin Tires 85% tread
100K mile service done
Trans serviced 4/18
Walnut sized dent in hood, a few scratches
Rear window shade sticks

PM me if interested
 
4x 315/75/16 KO2s - dismounted and ready to roll. Wheeled once. A few (maybe 3-4) thousand miles and no blems. Probably less to be honest. Just measured at least 14/32 tread, and 15/32 in most spots (which is the "new" tread depth spec). Pics tomorrow if I don't have to relocate to an ark...

$500 - see edits in post below.

Taking these down for now.
 
Anyone have this?

Can’t seem to find one. Rear cap for OEM running boards for the passenger side.

View attachment 1866083
I might, I actually just found two running board pieces in my garage I was about to trash tomorrow but I’ll check them.
 
I might, I actually just found two running board pieces in my garage I was about to trash tomorrow but I’ll check them.
Appears they aren’t correct
 
I have two OLD computers for FREE.
1) 17 years old, AMD Opteron 242, 4GB of memory, two 1TB Green harddrives, Seasonic power supply, customized silent case, and heavy. It worked great as a NAS/SAN, VPN, ssh portal, backup, and web host. It was running great with Ubuntu Linux 10.04 (2010) until it was replaced with a smaller dedicated system. This system is great for learning Linux on.
2) Intel i5 760, 8GB memeory, two 1TB harddrives, Bestbuy brand power supply, and light. I've removed the OS SSD drive and case fans but the system was running Ubuntu 16.04 (2016). It's not a gaming system but Windows 10 can be installed on it.

Let me know if you are interested or else they are going to Facebook marketplace.
 
Last edited:
Buddy of mine is selling a truck, located in Havelock. Text him (252) 342-1321

1995 Tacoma SR5. V6 4WD 315k Miles Tires are 85% and AT's. Needs some TLC but runs strong. Asking 3KOBO

4E5D5935-BE22-44E9-A014-20BD8E8A1C1B.jpeg


AFBDD5E2-2689-4787-B87B-D6D261424CE1.jpeg


6F363D7F-849E-42C5-87C5-C7EF584A16AC.jpeg
 

Users who are viewing this thread

Back
Top Bottom