Im looking for a late 70's beater, and the price seems right. Don't like the 350 though.
Official ONSC member buying/selling thread (4 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
How soon you need it? I've got one that will need a new home soon.
Warn 8274
Posting this for a friend:
Warn 8274 for sale. In good condition. Located in Durham, I can PM his cell number if anyone is interested.
http://www.nc4x4.com/forum/index.php?threads/warn-8274.134302/
Posting this for a friend:
Warn 8274 for sale. In good condition. Located in Durham, I can PM his cell number if anyone is interested.
http://www.nc4x4.com/forum/index.php?threads/warn-8274.134302/
How late and how beat? I knew of one a year or so ago, posted some pictures on here somewhere. It's a 76 needing a lot. At the time owner was asking $1800.00, but who knows now. I could check on it if that's of interest to you. It's in the Mt. Island lake area. It did have the 6 in it.
Shane
Do you think it would fit on my stock suspension where the tail pipe comes out between the leaf spring and the frame since I dont have the lift on mine? I didn't know if I would have enough room to run the tailpipe in the same place or whether you think I would have to cut it and reroute it.
There should be room with a stock suspension. I had the stock springs with stock length shackles, so you should be good to go there. I can't confirm 100% though, since I never had this on there when the truck was stock.
Still need to get pictures!! Should be able to do that tonight / tomorrow.
Does anyone have a pair of 3.73 differentials from a FJ60 laying around, or at least a pair of 3.73 fine spline gear sets?
There is a fj60 being part out in CL. Have you check with him?
Trailer fenders for sale
New trailer fenders for sale. I bought them to put on my trailer, but my buggy is wider than the deck on the trailer, so I can't use them without modifications. The fenders have surface rust on them from moisture in the air, but they can easily be sanded and painted.
$100 for the pair
These are the exact fenders: http://www.northerntool.com/shop/tools/product_200330847_200330847
New trailer fenders for sale. I bought them to put on my trailer, but my buggy is wider than the deck on the trailer, so I can't use them without modifications. The fenders have surface rust on them from moisture in the air, but they can easily be sanded and painted.
$100 for the pair
These are the exact fenders: http://www.northerntool.com/shop/tools/product_200330847_200330847
FS: Kimber Eclipse II Custom. Had a nibble, but buyer passed.
Full sized 1911 by Kimber, two tone stainless/black, ambi safety with target sights. Great shooter, only has a few hundred rounds through it. Pistol is in good shape, cosmetically there are a few scuffs on it, one on the lower frame and a few scuffs on the slide.
$950 takes it, can transfer to your FFL or can do face-to-face if you are close enough.
Full sized 1911 by Kimber, two tone stainless/black, ambi safety with target sights. Great shooter, only has a few hundred rounds through it. Pistol is in good shape, cosmetically there are a few scuffs on it, one on the lower frame and a few scuffs on the slide.
$950 takes it, can transfer to your FFL or can do face-to-face if you are close enough.
Hadn't seen it. Got a link?
33x9.50 BFG mts. Rare find
http://www.nc4x4.com/forum/index.php?threads/four-33x9-50x15-bfg-mud-terrains-like-new.136176/
http://www.nc4x4.com/forum/index.php?threads/four-33x9-50x15-bfg-mud-terrains-like-new.136176/
How soon do you need them? I have a couple of 3rds laying around. I will be in fayetteville the first of June.
Johnny,
This is the guy thats parting out an 87 60 in wilmington. I sent you the link but I'm pretty sure the guy only responds to phone calls. I tried emailing him a few times but he never responded so I finally called him and he has a lot of extra parts. I even think he has 2 carpet sets (brown & grey)
http://wilmington.craigslist.org/pts/3714419908.html
Wanted: 93-94 1FZ-FE
There are still other repower options being considered, however, current mill has severe piston slap that may last years but will eventually require replacement.
If there is a chance you have a pull-out sitting in the corner or if folks could please keep their eyes peeled for one I'd seriously appreciate it.
Would like the usual perfect scenario .... less than 24,000 original miles (well okay, how about lets keep it under 200,000), etc, etc.
Am willing to drive to neighboring states to pick up but would like to prevent a shipping scenario.
Other engines on the table:
6BT. I feel a challenge coming on.
2UZ-FE (With or without supercharger)
LS (Gen III) GM (Prefer 6.0L with cast iron block)
Thanks,
Rice
There are still other repower options being considered, however, current mill has severe piston slap that may last years but will eventually require replacement.
If there is a chance you have a pull-out sitting in the corner or if folks could please keep their eyes peeled for one I'd seriously appreciate it.
Would like the usual perfect scenario .... less than 24,000 original miles (well okay, how about lets keep it under 200,000), etc, etc.
Am willing to drive to neighboring states to pick up but would like to prevent a shipping scenario.
Other engines on the table:
6BT. I feel a challenge coming on.
2UZ-FE (With or without supercharger)
LS (Gen III) GM (Prefer 6.0L with cast iron block)
Thanks,
Rice
CL ad for 60 series (Winston)
Guy obviously knows what he's got! Very Rare.
http://winstonsalem.craigslist.org/cto/3666206929.html
Guy obviously knows what he's got! Very Rare.
http://winstonsalem.craigslist.org/cto/3666206929.html
R
Recognizable Rig
Everyone remember this guy from the Charlotte Scott Clark truck show?
http://cgi.ebay.com/ebaymotors/Toyo...9560591?pt=US_Cars_Trucks&hash=item3a7fa40c0f
Everyone remember this guy from the Charlotte Scott Clark truck show?
http://cgi.ebay.com/ebaymotors/Toyo...9560591?pt=US_Cars_Trucks&hash=item3a7fa40c0f
Wow. $47,700 sale price. I think I have the wrong wagon.
