FREE***** target brand tile saw, kinda like a radial arm in its 2x2x3 self contained carry case, imperfect but it runs... can bring to the barn
Official ONSC member buying/selling thread
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I'll take... getting ready to do my kitchen soon
I'm excited......
Anymore info on this? Why would you want a stocker over this? I've had one too many beers tonight so I'm too lazy to research.. Easier to ask. But I want this. Baaaaadd
A Pig Pickin'
I'm having a hard time selling the pig, my last resort is going to be ebay but I wanted to gauge interest in parting it out. I need at least 2k-2.5k to dig myself out from this hole.
Anyone interested in:
1977: 2F rebuilt with 1000 miles on it, runs great drive it before you buy it
front axle with disc brakes
4 speed trans
3 speed t-case
IPOR Front winch bumper
IPOR Rear single swinger with tire mount
IPOR sliders but they are welded to the body
I think those pieces would be the bulk of the value. I don't know the value on some of the parts but I'm flexible on price if it looks like the part out is going to work.
I'm having a hard time selling the pig, my last resort is going to be ebay but I wanted to gauge interest in parting it out. I need at least 2k-2.5k to dig myself out from this hole.
Anyone interested in:
1977: 2F rebuilt with 1000 miles on it, runs great drive it before you buy it
front axle with disc brakes
4 speed trans
3 speed t-case
IPOR Front winch bumper
IPOR Rear single swinger with tire mount
IPOR sliders but they are welded to the body
I think those pieces would be the bulk of the value. I don't know the value on some of the parts but I'm flexible on price if it looks like the part out is going to work.
Still cannot believe it hasn't sold.... bummed that I couldn't get it. 
Still cannot believe it hasn't sold.... bummed that I couldn't get it.
X 2...
im working on the wife!
Del i can hold on to it for you till u have time to pick up.
want one that is stock. but thanks for the offer..
Thinking of selling my rc crawler...
Axial ax10 scorpion
- very flexy 4link
- upgraded tires
- tekin fxr
- tekin 50 motor
- rear steer
- spectrum dx3e controller
- charger
- 4 lipo batteries
450 obo
Price drop - 375.00
$1k for a rebuilt 2F
I have potential buyers on the wheels and front axle. Need to find a home for the motor and I'll start to part her.
Rebuilt 2F, ~1000 miles... $1,000 any takers?? (high output alt. and distributor not included)
OR $2k for the whole damn truck... I need to fix my 80!!!
I'm having a hard time selling the pig, my last resort is going to be ebay but I wanted to gauge interest in parting it out. I need at least 2k-2.5k to dig myself out from this hole.
Anyone interested in:
1977: 2F rebuilt with 1000 miles on it, runs great drive it before you buy it
front axle with disc brakes
4 speed trans
3 speed t-case
IPOR Front winch bumper
IPOR Rear single swinger with tire mount
IPOR sliders but they are welded to the body
I think those pieces would be the bulk of the value. I don't know the value on some of the parts but I'm flexible on price if it looks like the part out is going to work.
I have potential buyers on the wheels and front axle. Need to find a home for the motor and I'll start to part her.
Rebuilt 2F, ~1000 miles... $1,000 any takers?? (high output alt. and distributor not included)
OR $2k for the whole damn truck... I need to fix my 80!!!
80 Series EMS Downpipe
I have an EMSPowered FZJ80 downpipe for sale. This is the section from the stock exhaust manifold to aft of the cat - it has a relatively new cat on it (unsure of brand, probably Catco). 2.5" stainless with flex sections.
One or both flex sections will have to be cut out and replaced as there is a leak.
The section after the cat will have to be tidied up a bit b/c I had Henry's do some work on it - but this should basically be bolt-on once the flex leak is fixed.
Asking $200 or make offer. No shipping, willing to meet within about 2 hrs of the Triangle.
You can see pix of the downpipe on the EMSPowered website.
I have an EMSPowered FZJ80 downpipe for sale. This is the section from the stock exhaust manifold to aft of the cat - it has a relatively new cat on it (unsure of brand, probably Catco). 2.5" stainless with flex sections.
One or both flex sections will have to be cut out and replaced as there is a leak.
The section after the cat will have to be tidied up a bit b/c I had Henry's do some work on it - but this should basically be bolt-on once the flex leak is fixed.
Asking $200 or make offer. No shipping, willing to meet within about 2 hrs of the Triangle.
You can see pix of the downpipe on the EMSPowered website.
OEM roll bar to fit a 77. Main Hoop only
does anyone have one laying around? i only want the big main hoop.
Hit me up via text or email if you can. 7049049927 or josh@jhcustombuilders.com
does anyone have one laying around? i only want the big main hoop.
Hit me up via text or email if you can. 7049049927 or josh@jhcustombuilders.com
wanted:
Free 80 series trailer hitch
story: I sold a hitch, bar, and ball to a mudder 6 mos ago and he has takin his time getting it and called yesterday to pick it up and I ran to the old house and found it had been stolen. grrrr so I need to refund him some cash or find him a replacement..... Just seeing whats out there. Thought I saw a free one on here or maybe a luke's recipient getting rid of one.
gone just a week and the scavengers came and stole every bit of metal they could find.... even the front porch handrail!
Free 80 series trailer hitch
story: I sold a hitch, bar, and ball to a mudder 6 mos ago and he has takin his time getting it and called yesterday to pick it up and I ran to the old house and found it had been stolen. grrrr so I need to refund him some cash or find him a replacement..... Just seeing whats out there. Thought I saw a free one on here or maybe a luke's recipient getting rid of one.
gone just a week and the scavengers came and stole every bit of metal they could find.... even the front porch handrail!
J - I got one in Burlington storage. Its urs. Come get we'll shoot and there might be more stuff you can take.
Its been a long time since I've posted here. Been away from doing LC stuff for awhile. Starting back and just bought a set of FJ40 OEM soft top bows from southboston. I am planning to build my own soft top and learn a new skill.
I would like to look at, take some measurements and maybe take a few pics of some soft tops in the area. Would be very interested in looking at OEM and OCD tops. Also would like to see soft top doors and soft top ambulance doors. Willing to pay for the time, maybe some beer
Please PM or email me (kevin.thorngren@gmail.com) if I can look tops.
Kevin
I would like to look at, take some measurements and maybe take a few pics of some soft tops in the area. Would be very interested in looking at OEM and OCD tops. Also would like to see soft top doors and soft top ambulance doors. Willing to pay for the time, maybe some beer
Please PM or email me (kevin.thorngren@gmail.com) if I can look tops.
Kevin