Official For Sale/Trade/WTB/Free Thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Does anyone have a 80 series spindle they can part with, I think this one is cooked

image.webp
 
I pitched my take-offs which I thought were bad enough (evidence of spun bearing/my fault w/first knuckle job mistake), but way better looking than those!

At least these are readily available and inexpensive...
 
Selling one of my 4 post lifts
Advantage DX-9000-HD

Reconfiguring one of my bays and no longer need this one.
Housed in a climate-controlled space, like new condition. Operated 15-20 times.
Comes with (2) aluminum ramps, (3) plastic drip trays, (2) rubber chocks and (4) casters

New_BYB_Charts_6.png


20260603_084549(1).webp



They're $8000 plus tax and shipping.
https://realgaragelife.com/products/...age-dx-9000-hd

My Ask is $4250.

The lift is fully-assembled currently. It will be much easier to move and reassemble having this as a reference.
I have assembled three of these lifts solo with moving dollies and a floor jack. It's heavy work, but not particularly difficult skill-wise.
Lift is located about 45 mins to an hour West of DC.
 
im tempted to stick it in my drive way lol
 
The assembly is a :banana::banana: job
Large combo wrenches. Phillips screwdriver. Cordless ugga dugga and sockets, gloves and a keen awareness of not putting fleshy bits into pinchy points. Save the beers for afterward.

The heaviest parts are the runways. 2 or 3 dudes car manhandle them. I used a floor jack and moving dollies without assistance.
I struggled with uprighting the posts/crossbar assembly every single time. Two people would be a snap.
 
Selling one of my 4 post lifts
Advantage DX-9000-HD

Reconfiguring one of my bays and no longer need this one.
Housed in a climate-controlled space, like new condition. Operated 15-20 times.
Comes with (2) aluminum ramps, (3) plastic drip trays, (2) rubber chocks and (4) casters

New_BYB_Charts_6.png


View attachment 4152200


They're $8000 plus tax and shipping.
https://realgaragelife.com/products/...age-dx-9000-hd

My Ask is $4250.

The lift is fully-assembled currently. It will be much easier to move and reassemble having this as a reference.
I have assembled three of these lifts solo with moving dollies and a floor jack. It's heavy work, but not particularly difficult skill-wise.
Lift is located about 45 mins to an hour West of DC.
I'm interested but won't have anywhere to put it until November. My dad is building a garage and has been thinking about going the Bendpak or Atlas route, but this is a great option too.

Don't hold onto it for my sake but if it's still around closer to November I will definitely reach out.
 
I'm interested but won't have anywhere to put it until November. My dad is building a garage and has been thinking about going the Bendpak or Atlas route, but this is a great option too.

Don't hold onto it for my sake but if it's still around closer to November I will definitely reach out.
Might be worth the hassle/cost of a storage unit…

Also, shop day when it’s done?? 😊
 
I love having a 4 post. It's so nice to just drive on for easier stuff. Ours is 14k rated pound and I was able to man handle it together by myself. The hardest parts was getting everything square and plumb before bolting it down. Looks like that may be one of the "mobile" ones so it'd be even easier.
 
Might be worth the hassle/cost of a storage unit…
Might be, but with his and my summer schedule it just wouldn't work out. If it's still available closer to October/November then there's a chance.

Also, shop day when it’s done?? 😊
If you want to make the 2hr drive to Richmond, then sure!
 
Listing these for sale, paid $185 shipped on eBay (plus tariffs but don't remember at this point); never got around to installing them on my 200-series before it got stolen, so no longer need them! I'm located in DC, willing to meet within a reasonable range.

"08611-60880 GENUINE OEM SIDE VISOR SET FOR LAND CRUISER 200 LX570 0861160880"

IMG_3251.webp
 
Free JL Audio powered sub

Just removed by from Disco 2 that was hauled off to the breaker.
It's the OG version of this one

Again, it's free. But I won't hold onto it forever. If you say you want it, you gotta come got it.

Will be listing a lot of other car/garage stuff.
Might start a separate thread to handle it.

Located west of Leesburg

20260606_122158.webp


20260606_122106.webp
 
Free JL Audio powered sub

Just removed by from Disco 2 that was hauled off to the breaker.
It's the OG version of this one

Again, it's free. But I won't hold onto it forever. If you say you want it, you gotta come got it.

Will be listing a lot of other car/garage stuff.
Might start a separate thread to handle it.

Located west of Leesburg

View attachment 4154092

View attachment 4154093
Sold. I'll PM you.
 
Free JL Audio powered sub

Just removed by from Disco 2 that was hauled off to the breaker.
It's the OG version of this one

Again, it's free. But I won't hold onto it forever. If you say you want it, you gotta come got it.

Will be listing a lot of other car/garage stuff.
Might start a separate thread to handle it.

Located west of Leesburg

View attachment 4154092

Free JL Audio powered sub

Just removed by from Disco 2 that was hauled off to the breaker.
It's the OG version of this one

Again, it's free. But I won't hold onto it forever. If you say you want it, you gotta come got it.

Will be listing a lot of other car/garage stuff.
Might start a separate thread to handle it.

Located west of Leesburg

View attachment 4154092

View attachment 4154093
Still have it or did imperium take it off your hands?
 
Back
Top Bottom