Official For Sale/Trade/WTB/Free Thread

[NearJetties]

SOLD - FJ40 Front Doors in DC

I have a pair of front doors for your FJ40! Both doors are complete with all hardware and inside panels. The passenger door is in very good shape; the driver's door has some rust at the bottom that will need to be fixed, but overall in very good shape. The doors are located in the DC area...

forum.ih8mud.com

SOLD - Fj40 Ambulance Doors in DC

I have a pair of ambulance doors in great shape - hinges and hardware included. Located in the DC area...$800 for the pair.

forum.ih8mud.com

Mentioned the swap meet to him.

 

[shmukster]

FJ40 hood and other parts for sale I am looking to clean out my small trailer. Nice hood not perfect but nice. Believe it is from a 76 or 77 so not split. No rust through anywhere. Will get some pictures up soon. Price $225 Also have some 40 bezels $25 each, a nice old windshield frame (wipers on top) $125, and a few serviceable (I believe OEM) fenders $100 each. I think there's a decent complete bib there too price $125. What else...... have a 40 radiator used but was trouble free when removed $100. Have a pair of 3.70 third members both came front FJ60 front axles $125 each. Have at least one (probably two) 4.10 thirds from mid sixties cruisers $125 each. FJ4- dash pads- none perfect or anywhere near perfect but solid and would be great to put one of those vinyl covers on $40 each. Best to email me but responding on this site works too. shmukter@pa.metrocast.net

 

[Stumpalama]

FJ40 hood and other parts for sale I am looking to clean out my small trailer. Nice hood not perfect but nice. Believe it is from a 76 or 77 so not split. No rust through anywhere. Will get some pictures up soon. Price $225 Also have some 40 bezels $25 each, a nice old windshield frame (wipers on top) $125, and a few serviceable (I believe OEM) fenders $100 each. I think there's a decent complete bib there too price $125. What else...... have a 40 radiator used but was trouble free when removed $100. Have a pair of 3.70 third members both came front FJ60 front axles $125 each. Have at least one (probably two) 4.10 thirds from mid sixties cruisers $125 each. FJ4- dash pads- none perfect or anywhere near perfect but solid and would be great to put one of those vinyl covers on $40 each. Best to email me but responding on this site works too. shmukter@pa.metrocast.net

Interested in that hood and bib. Any upper fender aprons?

 

[Stumpalama]

SOLD - FJ40 Front Doors in DC

I have a pair of front doors for your FJ40! Both doors are complete with all hardware and inside panels. The passenger door is in very good shape; the driver's door has some rust at the bottom that will need to be fixed, but overall in very good shape. The doors are located in the DC area...

forum.ih8mud.com

SOLD - Fj40 Ambulance Doors in DC

I have a pair of ambulance doors in great shape - hinges and hardware included. Located in the DC area...$800 for the pair.

forum.ih8mud.com

Mentioned the swap meet to him.

Never heard of this guy. It's amazing to me that there are local folks on mud who don't know there is a club here and a local classified section as well.

Driver door has a decent dent in the top and looks a bit deformed as well.

 

[shmukster]

Interested in that hood and bib. Any upper fender aprons?

I believe I have a few aprons will look. Will also get some pictures of the hood and bib.

 

[Stumpalama]

I believe I have a few aprons will look. Will also get some pictures of the hood and bib.

thanks Gary!

 

[matzell]

Never heard of this guy. It's amazing to me that there are local folks on mud who don't know there is a club here and a local classified section as well.

Driver door has a decent dent in the top and looks a bit deformed as well.

Hard to get a hold of but I stopped by and cleaned him out of all the good stuff after Coal Miners 2019, on the way home. I dropped some cash but got some good stuff. He did not show me everything but had a 79 FJ40, fiberglass body on a 78ish frame. Parting hole thing out. He was asking Ebay prices for most stuff but I had cash in hand...

 

[Stumpalama]

Hard to get a hold of but I stopped by and cleaned him out of all the good stuff after Coal Miners 2019, on the way home. I dropped some cash but got some good stuff. He did not show me everything but had a 79 FJ40, fiberglass body on a 78ish frame. Parting hole thing out. He was asking Ebay prices for most stuff but I had cash in hand...

Yeah, he's asking top $$ for those doors, for sure

 

[rrc swb]

This I cannot give away... Would like to get what I paid for them.

No longer have the truck nor the rack.

They are for the 4" Garvin Wilderness Rack

(6) Light Mounts - Part No. 88134
(1) Hi-Lift Jack Mount - Part No. 29914
(1) Spare Tire Adapter - Part No. 29880

Everything for $185

 

[StaleAle]

Hi Gary - Sent you a PM re: the fenders but MUD was acting wonky.

 

[jcj_78FJ40]

Have a pair of 3.70 third members both came front FJ60 front axles $125 each.

Interested in 1 possibly both of these. I'll send you an email.

 

[Devilmans Hand]

If anyone wants the stock thirds from my 86 4runner 4cyl they are up for grabs free. 4.10 or 4.11
IfS 7.5" and an 8" rear.

 

[VA.CRUISER]

If anyone wants the stock thirds from my 86 4runner 4cyl they are up for grabs free. 4.10 or 4.11
IfS 7.5" and an 8" rear.

I’ll take the rear third and both if you want them outta your way but can only use the rear.

Thanks
Burl

 

[NearJetties]

big boy

For Sale - 73qt ARB Zero dual zone fridge

I’m selling a basically new ARB zero dual zone fridge. The only reason I’m selling is because it’s a little too big for my T4R. It’s in perfect condition ( it’s only 2 months old). I have everything but the box it came in. Price-$1200 I’m located in Va, no shipping.

forum.ih8mud.com

 

[shmukster]

FJ40 hood and other parts for sale I am looking to clean out my small trailer. Nice hood not perfect but nice. Believe it is from a 76 or 77 so not split. No rust through anywhere. Will get some pictures up soon. Price $225 Also have some 40 bezels $25 each, a nice old windshield frame (wipers on top) $125, and a few serviceable (I believe OEM) fenders $100 each. I think there's a decent complete bib there too price $125. What else...... have a 40 radiator used but was trouble free when removed $100. Have a pair of 3.70 third members both came front FJ60 front axles $125 each. Have at least one (probably two) 4.10 thirds from mid sixties cruisers $125 each. FJ4- dash pads- none perfect or anywhere near perfect but solid and would be great to put one of those vinyl covers on $40 each. Best to email me but responding on this site works too. shmukter@pa.metrocast.net

I posted pics of everything on the Keystone for sale site. Didn't want to use up any more storage space by duplicating here.

 

[jcj_78FJ40]

For the PA guys

Warn 8274 Winch

Rebuilt Warn 8274 Winch. No controller. Rebuilt this last year with new motor, control box, etc. I can’t seem to find the controller I had for it so selling without controller but still a steal at...

www.facebook.com

 

[Stumpalama]

For the PA guys

Warn 8274 Winch

Rebuilt Warn 8274 Winch. No controller. Rebuilt this last year with new motor, control box, etc. I can’t seem to find the controller I had for it so selling without controller but still a steal at...

www.facebook.com

Thats not a bad price.

 

[Von Hayek]

That would look good on Jack's 40.

 

[fjdemon]

Hey all,

Sorry I've been MIA, accelerated schooling and work have been absolute chaos. Anyway, I'm still alive and I have this truck camper shell I need to get rid of. If anyone wants it, I'll let you have it for FREE. I'm picking up a slide in camper this weekend and have no use for it or place to store it. I paid $300 for it several months ago and I thought it was an amazing price, but plans changed.

Fits a 1994-2001 long bed dodge truck. It may fit other long bed trucks as well, but it's made for this truck. Would make excellent yard art. Want to piss your neighbor off? Would be a great chicken coup! This crazy deal popped up on a slide in so I need to have it off my truck by Friday night. Needs clear coat on top, does not have a key, bu the price is right. Windows and seals are in great shape. I will include the C clamps as well (I think I have four on it).

PENDING PICK UP

 

[Stumpalama]

Hey all,

Sorry I've been MIA, accelerated schooling and work have been absolute chaos. Anyway, I'm still alive and I have this truck camper shell I need to get rid of. If anyone wants it, I'll let you have it for FREE. I'm picking up a slide in camper this weekend and have no use for it or place to store it. I paid $300 for it several months ago and I thought it was an amazing price, but plans changed.

Fits a 1994-2001 long bed dodge truck. It may fit other long bed trucks as well, but it's made for this truck. Would make excellent yard art. Want to piss your neighbor off? Would be a great chicken coup! This crazy deal popped up on a slide in so I need to have it off my truck by Friday night. Needs clear coat on top, does not have a key, bu the price is right. Windows and seals are in great shape. I will include the C clamps as well (I think I have four on it).



View attachment 2451994View attachment 2451995View attachment 2451996

Glad to see you send up a flare.