OEM bumper color?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I have not seen a re-painted bumper that looks the same color as stock, some get pretty close but not the same. Best solution if your restoring and/or if your bumpers or bumperettes are dented or just ugly anyway........buy new OEM stuff, front is $125, rears are under $30 each. Not long ago you could still get new OEM chrome if you liked(me liked ;).

I just re-did(striped and painted) the rear plate carrier, reused everything but the covers, for $40 I got a pair of new OEM, looks MUCH MUCH better then the re-painted ones I had on it.

I know........ a rattle can is alot cheaper........blah blah blah ;)

John
 
Metal flake gray (pewter) is probably one of the hardest colors to match and I
have seen quite a bit of variation even on stock, unrepainted cruisers. Pewter
also fades like crazy. Order a new glove box door, rear view mirror, front bumper,
side mirror arms -- all of which were supposed to be the same pewter (I think
that's true -- is it pimp?) and you will see some variation. If I were restoring
a cruiser I would just try and paint as much of the stuff I could at the same
time -- to try and get it to match.
 
prolly true. most of the re-painted stuff see has too much glitter in it.

all my new OEM pewter stuff seems to match very well.

rgentry said:
Metal flake gray (pewter) is probably one of the hardest colors to match and I
have seen quite a bit of variation even on stock, unrepainted cruisers. Pewter
also fades like crazy. Order a new glove box door, rear view mirror, front bumper,
side mirror arms -- all of which were supposed to be the same pewter (I think
that's true -- is it pimp?) and you will see some variation. If I were restoring
a cruiser I would just try and paint as much of the stuff I could at the same
time -- to try and get it to match.
 
Pimp is right about the glitter. I just repainted some stuff and endup sanding
it a bit with 2000 grit wet sandpaper -- then buffing it out. After that, it looked
almost exactly like factory.
 
If the new bumpers are available, and they are, if finances allow...get a new one and be done with trying to match the color with powder coating or paint. It will probably cost a whole lot more to try to get someone to match the color in liquid paint.
 
The correct color is toyota ash grey metallic. It's in the faq I believe, if not, I have the code at work, and it is an exact match.
 
Sure, what's the question? I've put it on a boat load of bumpers. Also mirror arms, hood hooks, seat backs, everything. Fire away...
 
Diescipel said:

Although your link missed somehow, the stuff that JT sells in spraycans is a very good match. I've used it on a lot of little stuff including bolts that are through the new OEM bumper on my BJ40 and can't see a difference with a spray painted bolt head flush with a factory painted bumper. Shake it VERY throroughly.
 
Rattle Cans

Prior to leaving the Phoenix area, I had a couple of spray cans made at Space Age Paints in Mesa. BASF Paint, R-M product line. Paint color C2M MA394.50. Paid ~$28 for 1/2pint, loaded into 2 spray cans with a little left over for touchups. Used it for refinishing a rear heater. Basically indistiguishable from OEM. I had used the ash tray cover to match. It's a basecoat only, so you have to shoot it with can of clear coat. I think it turned out pretty well, and plan on refinishing a few other items with remaining can. Just an option...
 
Texx said:
Sure, what's the question? I've put it on a boat load of bumpers. Also mirror arms, hood hooks, seat backs, everything. Fire away...

The question is do you have a live code for T1434?

Not looking for a rattle can but for a code my paint guy can order...

Thanks!
 
Back
Top Bottom