OBD I engine in a 97

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 18, 2005
Threads
4
Messages
23
Location
Saratoga, CA
Sorry if this is a dumb question.

My cruiser is a 97. I've been nursing a knock forever. Well, it finally let go and now I'm in the market for an engine. Found a good, low mile 94 for a good price. My question is, how extensive are the differences between the engines out of OBD I vs OBD II vehicles? Are the long blocks the same? Any issues running a 94 block with my 97 harness?
 
@Pin_Head is on point.

To add context into the amount of work though.. In addition to R&R both pans, the timing cover needs to be removed to gain access to swap the crank position ring onto the 94 crank. That requires valve cover too..

I can't see why you'd need to remove both manifolds from the head, but other than the head/manifolds everything will need to be removed from the front/top/bottom of the block to make the 94 engine work in your 97
 
Back
Top Bottom