O.E. Power Steering Box

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 29, 2004
Threads
24
Messages
90
Location
Salt Lake City, UT
I am currently rebuilding my power steering box. Am I am having a little trouble getting the pitman arm reinstalled. Seems to be a few thou. of an inch smaller than the splinned shaft. I haven't found anything in the thread search. I am just wondering if any one has had this problem and how the rectified it. I can heat it if need be but I would rather not. If any one could direct me to some good references pertaining to a p/s box on a 40 that would be cool.



:)
 
Yes it is deffinatly being installed with the correct orientation! Any more thoughts? If I can get a chance I will post some pics by next week.
 
I spent some time on it with a wire wheel and I guess that was what it needed because I am not having any more problems with the pitman arm. Now I can get it started and the nut will take care of the rest of the instalation. I couldn't visibly see what the problem was but it must have been very very small. Thanks for the help guys!
 
Back
Top Bottom