+nuetral safety swith location

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 18, 2006
Threads
137
Messages
992
Location
hillbilly desert rat
cruiser wont start .there is no click at teh starter nothing happpen except the click under the kick panel and the clock goes dim .is there more fusable links besides the 3 coming off of the battery ??where is the nuetral safety switch located at the tranny or another place..last resort will be to pull the starter ,,thanks for the help
 
Don't know about yours, mine is on the USPS of the tranny.

Sounds like starter contacts, though.
 
Sounds like a dead battery, bad battery connections, or bad starter. The truck will also start in neutral, so if it doesn't start in 'park' you can try that. Dimming electrical system indicates one of the above problems.

FWIW it doesn't sound like starter contacts to me, if it were narrowed down to the starter I'd guess the windings were toast, or the bearings junk. It's not having a problem drawing current if it's dimming the clock, and if the contacts are bad the starter won't get the current it needs.

-Spike
 
Sounds like a dead battery, bad battery connections, or bad starter. The truck will also start in neutral, so if it doesn't start in 'park' you can try that. Dimming electrical system indicates one of the above problems.

Agreed. Sounds like it's pulling current and there's not enough available from the battery. If the battery was good and all contacts were good, you would at least hear the starter solenoid slapping in when you turn the key to start even if the starter motor was siezed.
 
cruiser wont start .there is no click at teh starter nothing happpen except the click under the kick panel and the clock goes dim .is there more fusable links besides the 3 coming off of the battery ??where is the nuetral safety switch located at the tranny or another place..last resort will be to pull the starter ,,thanks for the help

Forgot to answer on my last post.

3 fusible links is all you get and the NSS is on the left side of the tranny. If it was the NSS you would possibly have trouble with the dash tally lights that tell you what gear you're in as they are switched by the NSS. BTDT. You can manually jump out the NSS if you want to eliminate this as a possibility. The harness runs from the NSS up over the tranny and terminates to 2 connectors on the right side of the tranny hump close to the firewall. The small circular 2 pin connector is the NSS contact closures and the larger square multi-pin connector is for the dash tally lamps. If you put a meter on the NSS contacts you should see them make when you're in P and N and break when in any other gear.
 
Agreed. Sounds like it's pulling current and there's not enough available from the battery. If the battery was good and all contacts were good, you would at least hear the starter solenoid slapping in when you turn the key to start even if the starter motor was siezed.

the battery was dead i left a light on for the week .. we charged the battery full charge and still nothing ..

what a shame they dont put the starter in a easy access location .. waiting for it to warm up so i can go work on my cruiser ..

at least it has the decency to break in the drive way rather that on a wheeling trip out there by myself 100 miles from any cell service .. i really neeeed to get my ham radio lisense for such of a emergency ...


i am going to start by checking the alarm shut off also maybe it went kaflooe it fooled me one time before ...any more thoughts is much helpful thanks
 
Doesn't really sound like starter contacts.
 
Mine did the EXACT same thing last week. Turned out it was the starter (not the contacts).

Dan
 
the battery was dead i left a light on for the week .. we charged the battery full charge and still nothing ..

Did the truck start fine before the battery died? Maybe the batterry won't take a full charge. Maybe the battery is old. Did you try a new battery?
 
thanks for alll the advice and help .. i get the d.a. award today after the battery went dead you must reset the security sys in the truck { aftermarket } i hit the button and never heard the click so that is where i started .. found a broken wire on the kill switch . repaired switch and she starts o.k. I wonder if it has been loose for a while and finally broke .. i have been having no start issues for a few week .. hit the key and nothing then hit it again and it would start .. may still be the brushes and plunger .. i may change them as a p.m. but all was well for today ..went on a good run met up with a fellow cruiser head i met today and took him for a senic run ... fellow was from out of town and we talked instant wheeling trip ... thanks alll for the help .. some times bouncing ideas really helps me think harder on the problem
 
Back
Top Bottom