Nice Rack!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 21, 2003
Threads
175
Messages
7,412
THANK YOU!!! :hillbilly:




















.


.


.
Roof Rack 013.webp
Roof Rack 029.webp
Roof Rack 023.webp
 
The manufacturer is Aiba Works (in Japan) and this is probably my favorite rack offered by them (Noselda II).

It's made of aluminum (light), but is pretty strong. It's used (obviously) and I got their 3/4 length (1.6 meters) model. Although I had contemplated getting the 2.0 meter model (shy of 7ft) it was very hard to come by and I just could not turn this one down for the price! :grinpimp: And since I actually enjoy having the sun room open every so often it's not such a bad thing anyway!

It's fully modular and can be disassembled.
You can get different lengths of mounting feet. The ones that came with this rack is a size longer than the 80 rack originally came with, but because of it's (light) weight it's hardly noticeable that it's even there going around corners or driving with the sun roof open (Sun roof deflector might be helping a bit). But if I can pick up a set of shorter ones I'd like to do that, just to keep the COG as low as possible.

Please refrain from commenting on my ugly hood, left rear fender flare gasket flopping, and the 3rd-row sliding windows louver missing (The ones for the fixed windows and the fliding ones were different and I haven't picked the wagon ones yet!)


.


.


.
Roof Rack 019.webp
Roof Rack 009.webp
Roof Rack 005.webp
 
Last edited:
And just for fun, these are all of the racks that Aiba Works has in their line up.

I have a few ladders, but it appears that only the OEM ladder would work with the OEM rear visor I have on. :doh: (I don't have one!)

You can get them in different lengths and widths, again with different lengths/numbers of feet as well. The longest lengths, for example, is 3.2m, or almost 11ft.

Anyway, too bad I can't DD my cruiser to enjoy it (Expired registration, etc... I got temp plates so I can pick the rack up, as well as getting some work done on it). :doh:


.


.


.
 
Lookin' good Mot!! :D I really like Aiba'a racks....who said there is only one rack size in Japan!!!! ;)

Gord
 
Jeff,

I haven't seriously looked into sending something this large/heavy to Canada, but I would think it would be similar to the US.

For 3/4 and the full-length racks (and beyond) we cannot use Canada Post/USPS (Max. length is 1.5m).
So I would have to go with an independent carrier which does door-to-door with slowboat.

Shipping cost, assuming the whole rack weighs somewhere between 20 - 30 kgs, to the west coast would be around $200 - $250US (Plus duty, etc...)

And as for the rack costs, used ones in good condition could usually be had between $250 - $400US. (I got really lucky and got mine for less though!)

The new ones retail costs would be pretty expensive though (Link to the retail costs of individual racks can be found on the above link), but if I were to get them for anyone I should be able to offer them for retail, maybe even a bit better.

I think, in the end, a new one would cost you somewhere north of the $1000US line, with shipping and all. :eek:

So finding a used one would be a wiser choice, unless you have a large wad of cash burning a hole in your wallet!

It was a no-brainer for me as it was one of my favorite racks, the cost was unbeatable, and I would not have to pay anything extra to ship it to N. America/Canada if I have it mounted it on my rig!



Gord,

THANKS!! :hillbilly:

I'll let you know if/when I see another smokin' deal on a used unit. :grinpimp: ;)

Mot
 
Not that you asked for them, but I've taken some pics of the rack from overhead just to illustrate how nicely it fills the roof area aft of the sun roof.


.


.


.
Racks and Bryce's Experiment 002.webp
Racks and Bryce's Experiment 008.webp
Racks and Bryce's Experiment 010.webp
 
I don't see a ladder. You climb up via the door ?

I like the slats. Perfect for using as a seating platform and with an umbrella and a cooler, you would be sitting pretty watching and photographing 4x4 events.


kalawang
 
Kalawang,

As I had tried to say it above, it appears that the only ladder commercially available ever that would work with the OEM rear visor would be... well, the OEM rear ladder from Toyota. :hillbilly:

It appears that all of the other ones (at least the ones that I have in possession) would hit the visor. :doh:

I actually have the OEM ladder, but the top brackets are mis-matched and am missing some of the components from the bottom brackets as well. I'll just have to be on a look-out for another used one, this time for myself! ;)

Anyway, I had the visor off for a long time, but just recently installed it after getting the rack on. But before getting it mounted I had put on another ladder to climb up and to get on the rack myself.

It felt pretty sturdy (I don't weigh 250 though! :D), but not long enough to sleep on it! But I love having the sun roof though, so I'll just have to do without the extra 40cms of the full-length rack!

Actually, I'm now on a look out for a aux. lamp bar that matches the rack and will mount over/in front of the sun roof. :hillbilly:
 
That is a nice rack. Good find!

Thank you! :)

I wasn't sure if I would like all of the chrome/silver pieces when I picked up the truck (used).

The mirrors and the door handles were there to start with. I added the front bumper (aluminum) and now the roof rack.

I'm starting to like the look and can't wait to add the ladder in the back and a pair of silver sliders or something. :hillbilly:
 
I wasn't sure if I would like all of the chrome/silver pieces when I picked up the truck (used).

I'm starting to like the look and can't wait to add the ladder in the back and a pair of silver sliders or something. :hillbilly:

I'm sure we could send you a full set of chrome curb feelers!
 
Back
Top Bottom