Newbie's 1st post - lift question ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 26, 2005
Threads
16
Messages
106
Location
Seville, OH
Hey all, been lurking around here for a few months. Mostly looking for tech info on a few things. You fellas have been a huge help. Tons of great info. It's great to see such an active site for cruiserheads. I figured I should register.

Just got my rig back from Man-A-Fre down in SoCal. I had the unusual luxury of some disposable income recently. I knew if I didn't do it now, it would probably never happen. So, with the wife's approval of course, I swallowed my restraint and dropped one of their Hi-Performance 2F's in - with all the trimmings.

The thing is a huge improvement over the F that was in it - no comparison. It should be good fer a few years now.

Next on the list is a suspension upgrade. I'm 90% sure I'm gonna go with the OME 2.5 inch kit. Did some reading on the Dakkar springs. They sure are a bunch cheaper and allegedly the same quality as the Aussie springs.

My question is - Any of you guys have any experience with them ? Or know anybody that has ?

And if so - what's the word ?
 
It will be an off-roader. The wife likes to drive it around town as well. I don't plan on running the Rubicon. But I do wheel it pretty frequently. A few of the trails are on the hairy side. I've already had to tow a few jeeps out of trouble. And passed by a stock Taco who got hung up on a rock. It won't be a crawler. But it will be riding in rough country.

The suspension is stock right now - 36 years old next month. And it rides like it. Definately needs an upgrade...
 
tojons said:
- 36 years old next month. And it rides like it. Definately needs an upgrade...

I hear you on that, Mine will be 34 ;) and now SOA, could be due for a new set.
You will hear plenty, perhaps more than you want to know in the mornig, when all cruiserheads get out of bed.
Good luck :beer:
 
I put a 2.5 BDS kit in my 77FJ40, if I had to do it over again which I might.

I would most likely go with the HFS or OME..leaning twards OME cause of reputation and my experience with a 2.5 OME equipped FJ60...
 
Have an OME (older, not Dakkar) 2.5 in lift with Rancho RS9000 adjustables. Can run 33X9.5 or 32X11.50 with uncut fenders, and 33X12.5 with cut rear fenders. You COULD run the Rubicon with this set up. Remember, its a short wheel base spring under leaf sprung truck. The OME rides as good as any 40 I have been in but will never ride "like a Cadillac," period. Longer wheelbase (like a 60) makes a world of difference. I think the quality of the OME, and prolly the Dakkar, is great. I got mine used and would shy away from new OME prices; the Dakkar looks good for the money. A couple of vendor here offering good deals. I've heard mixed things about CCOT stuff. I recommend a SOFT shock; my Ranchos are on the softest setting for best ride on and off road.
 
I haven't seen anyone claim sagging Dakkar springs yet. For about every spring available someone will say that theirs sagged sooner or later.
 
Nice fish Doc ! Didn't know they had rainbows in TX.

I'm running 31X10 50R15 BFG's right now, but have a set of 33X12.5 BFG's that PO had on when I bought it - they're still almost new. I swapped them out after wheeling with it and having the 33's rub on the rear every time I cornered. I haven't had any probs with the 31's.

I realize I'll never have a Caddy ride. But the ole lady says the Cruiser ride has added 10 years to her chest if you know what I mean. I need to do what I can to keep those puppies upright. ;)

Thanks for the info.
 
Welcome, all newbies get the :flipoff2: , so here's your, from me :flipoff2: . Anyway your 40 sounds awesome and from your avatar looks great. You'll find out soon enough we all like pics of each others rigs, so post 'em up lets see what you've done and let's see that purty new 2f.
 
Here goes. These pics are from after the hardtop got restored. Still had the 33's on at that time. No pics of the new 2F yet, but I'll try to take some today and post em later.
 
Last edited:
www.cruiseroutfitters.com may still have a 2.5" OME kit available at a great price. Reports are that the Parabolics give the nicest ride and mad flex and articulation off road, but you just missed out on the TLCA group buy at 30% discount, though you may still be able to order a set from www.greatbasinrovers.com . HTH

B
 
Nice looking rig, You obviously taker care of it (Shiney tires). Welcome to the club! I have a skyjacker and am happy with it. It's 4 inches and I like the height with my 33's. I have an OME suspension on my LX450 and am really happy with it. If money was no object, I would have gone with the OME.

Oh yeah, :flipoff2: welcome

Ken
 
I have a skyjacker lift like Romer, (4"). It is decent quality, good price, and has not sagged. When my truck is running, it gets beat on pretty hard.

I needed the skyjacker as an inexpensive solution so I could fit some bigger tires and get on the trail. For a truck as nice as yours appears to be, I would not want to put anything less than OME on it.

I have been around more sets of Dakkar springs than you can imagine, (stacks and stacks). Visually, build quality appears to be very nice. The ride is just as nice.

David @ www.urbanlandcruisers.com can hook you up. (see rotating ad top right corner)
 
I run the ome 2.5 on my bj 42 with no complaints. I bought their anti inversion shackles and polyurethane bushings, everythings greasable which is really nice. I like the ome shocks too. I drive gravel grid roads regularly and I found it took alot of the kick out of the short wheelbase.

I think the best part is it's all specifically designed to work together as a system.

clay
 
If you are gonna wheel it and you think 33's are all you will ever have, think again! 2.5 is only the start. Everyone that I have ever known that went with 2.5" lift wishes they had done the 4" Think about it before you buy. You can get the 4" for the same price.

Later,
 
what part of murphys you in?
I'm right up in arnold so if you need any help just holler or if you want to go wheelin'.
 
Out off of Penn Gulch. You ever do the Barney Riley off of Monitor Pass ?

I've seen a few 40's around but not too many. A couple parked up in the snow banks near Tamarack. What kind of rig are you running ?

I'll let you know if I need a hand.
 
I've got the big red one that I run up and down the hill with you'll hear the diesel from a mile away too. That one up by tamarack thats blue(POS) the guy wants four grand for it and he's a real dick. I've never done the Barney Riley trail, but I've done Slick Rock many of times and Ramsey once(up hiway 4). We should go wheelin some time when the weather gets better and my pockets are little fuller($$$). plus I've got some cruiser parts layin around if you need some, like a complete 2f.

See ya Josh
 
Josh,

Will do, I'd like to do Ramsey's sometime - after the lift goes in. I thought that was gated. I've walked it to fish the river down there, but could never figure out how to get my rig in there - when I've been down there though, I've seen people drive their rigs in so I know you can get in.

My wife wanted me to ask if you knew of a guy name Chris in Arnold who had a few Cruisers. Before I met her she had a blue 40 she bought from him. She later rolled it and totaled it out (which makes me a little nervous). She lived up in Arnold for 8 years.
 
Back
Top Bottom